After installing the floor, consumers generally think that they are done, but it is important to understand the follow-up of the floor installation. Let's take a look at what other items are needed by the owners and friends after the installation of the floor. First, the humidity should be suitable The normal use environment humidity of the floor should be above 40%, and the optimum humidity is 50%~60%. Because the environment is too dry, it will also cause the dry floor to shrink in winter. Therefore, in the geothermal environment, reasonable adjustment of the humidity of the room is the most effective way to prevent floor deformation. Second, the maintenance must be careful When using multi-layer parquet to make geothermal, the thickness of the surface of the floor is 0.6 mm, and the surface compressive strength is relatively weak. If the stool legs in the room are not protected, when the person sits on the stool, the floor will be The surface is crushed. Third, the temperature should be controlled Before the floor is installed, the geothermal system should be pressure tested to prevent damage to the floor due to geothermal pipeline leakage. The water supply temperature of the geothermal system should not exceed 60 °C. In the initial stage of geothermal heating, the temperature rise should be gentle. The water supply temperature should be controlled at about 10 °C higher than the ambient temperature at that time, and should not be higher than 32 °C; and should be operated continuously for 48 hours; The water temperature rises by 3 °C every 24 hours until the designed water supply temperature is reached; the ground temperature directly contacting the floor cannot be higher than 42 °C.
Filter Disc is
processed by puncher with special mould. It's one of the filters; meanwhile it's
also one of the most widely used products. The wire
mesh disc is mainly based on the processing customized size and shape of the
customers. The filter mesh has so many different apertures, that it can meet
the needs of different filters. The filter
mesh appearance is very beautiful, for a variety of containers is no problem
The shape of Metal Filter Disc include rectangle, square,
round, ellipse, ring, rectangle, hat shape, waist shape and abnormity.
Wire mesh disc structure: single,
double, multilayer.
Processing technology: double or
three layers of spot welding, solder joints are generally 4 - 10 different,
also can according to customer requirements to do single-layer and double layer
hemming.
Rim material: stainless
steel plate, copper plate, galvanized plate, aluminum plate, etc.
Filter diameter: generally 5
mm to 600 mm
Use: Filter wire
mesh products (referred to as filter), mainly used in rubber, plastics
industry, grain and oil, oil refining, screening, chemical industry, light
industry, medicine, metallurgy, machinery, shipbuilding, automobile and tractor
industry in distillation, absorption, evaporation, filtration process,
eliminate entrained in the steam or the droplets in the gas and liquid foam,
and car used as air filter.
Filter Disc Filter Disc,Stainless Steel Liquid Filter Discs,Stainless Steel Filter Disc,Metal Filter Disc Anping Xinzheng Metal Wire Mesh Co., Ltd , https://www.sievingmesh.com