Musk Xylene was once the most widely used of the "nitro-musks", but its use has declined sharply since the mid-1980s due to safety and environmental concerns,and musk xylene is a useful example of the lowest level of such risks which need to be taken into account.
Musk xylene has been used in a wide variety of consumer products since the early 1900s, usually in very small quantities.
Raw Musk Xylol,Raw Musk Xylol Allergy,Raw Musk Xylol Kit,Raw Musk Xylol For Sale Gan Su Original Flavor Co.,ltd , https://www.futureperfume.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Precision level of rolling bearings Rolling bearing accuracy grade
The accuracy of the rolling bearing is divided into (primary) scale accuracy and rotation precision. The accuracy grade has been standardized; it is divided into 0 grade, 6X grade, 6 grade, 5 grade, 4 grade, 2 grade 6 grades. The precision is improved sequentially from 0 grade; Regarding the normal use level 0 has been met; but when used in the conditions or occasions shown in Table 1; the accuracy of level 5 or higher is required. The above accuracy level is based on the ISO specification; but its title is regulated in various countries. It is different. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Scale accuracy (items related to shaft and housing units)
1. The tolerance of the inner diameter, the outer diameter, the width and the installation width, the tolerance of the complex circle diameter and the diameter of the outer complex circle in the roller group, the allowable limit value of the chamfering scale, and the tolerance of the width of the rotation. Project related to the rotation of the rotating body)
1. The inner ring and the outer ring allow the radial runout and the axial runout. 2. The inner ring allows the lateral runout. 3. The allowable variation of the outer diameter surface inclination. 4. The allowable variation of the thrust bearing raceway thickness. 5. The tapered hole. Acceptance error and allowable variation
Recommend to friends comments close window Bearing related knowledge Method for making rolling bearings DD ferrule forming method
SKF bearing rolling bearing correction conditions affect the FAG bearing grinding 蜕 change layer analysis of the bearing parts after heat treatment common quality defects analysis of bearing adjustment
This article links to http://
Please indicate the bearing network http://
Previous:The reason for the damage condition of the bearing and the rescue method are discussed in the next section: "Scheduled roller bearing timing check" has a coup
Source: China Bearing Network Time: 2014-06-21