Metallographic Polishing Cloth Cloth wheel polishing the main material is cloth, used for polishing the mechanical wheel. Polishing cloth wheel, material linen, cotton, non-woven cloth, flannelette, denim, miscellaneous cloth and linen wheel, nylon wheel, emery wheel, used for all kinds of polishing tools. Metallographic Polishing Cloth,Metal Polishing Cloth,Buffing Machine Tools,The Grinder Machine TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com
Performance: this kind of product is generally made of cotton twill and cotton cloth cut, strong sewing force, strong grinding force. Specification: according to the size provided by customers. Usage: this kind of product is usually used for grinding, even polishing, but also need to depend on the workpiece material and product quality requirements, can not be generalized. For example: the workpiece material hardness is low can also be rough grinding, polishing quality requirements are not very high, can also be used as polishing, etc..
When repairing the inlet and exhaust valves of air compressors, it is usually used to manually grind the valve port, which has low efficiency and poor effect. If on the drill press (as shown), use the drill chuck 1 to clamp the eccentric flange shaft 2 (The lower shaft is 3mm away from the center of the upper shaft), and then the rubber mat 3 with thick 20mm (the upper and lower ends are sawn into a mesh shape), placed on the lower shaft of the eccentric flange shaft 2, and pressed to the valve