ICESUN vacuum glass can maintain the high vacuum degree of the glass cavity for a long time, and greatly reduce the failure phenomena such as performance attenuation in various harsh environments. The fulcrum in the glass room is placed automatically by the machine, and the building glass is clamped automatically with a vacuum degree of 10-4 Pa when vacuumizing. 12mm ICESUN tempered vacuum glass is much lighter than 20-50mm insulating glass, which has lower requirements for structural frame materials and hardware components, and reduces the cost of doors, windows and curtain walls by about 50%. The window with Safety Vacuum Glass is not easy to sag and deform, and the service life is longer. ICESUN Vacuum Glass For Buildings adopts low melting point technology, aerospace grade welded glass edge sealing, with the same expansion rate and no air leakage, all of which make our High-tech Vacuum Glass popular among building glass materials.
Long Life Vacuum Glass,Long Life Insulated Glass,Long-Life Vacuum Insulated Glass,Long Life Glass For Buildings ICESUN VACUUM GLASS LTD. , https://www.icesunvacuumglass.com
It is estimated that during the “Tenth Five-Year Plan†period, the domestic market share of drying equipment will reach 90%. At present, there are two ways to address the regional focus of performance and the ability to innovate in technology. Most of the enterprises in the distribution equipment industry in China are gradually producing early-stage enterprises on the basis of the industry, and the relatively concentrated geographical location and serious defects in the personnel structure. So far, companies are mainly located in Jiangsu, Zhejiang, Shanghai, Liaoning, and black. These companies account for almost 50% of the total industry. In contrast, there are some areas where there is no drying equipment manufacturing in China. Business. In highly competitive industries, some companies focus on immediate results, do not need any system development, improve overall quality, and progress slowly, seriously hampering the normal development of the industry. Technology development is not strong since the reform and opening up, especially in recent years, China's economic growth potential has been effectively released, and the supply and demand of the shortage economy has undergone fundamental changes, initially forming a buyer's market. In the pressure of the buyer's market, some companies are catching up in the market, rather than looking for and opening up new markets, companies are focusing on the market's demand in the near future, more mature products. Therefore, in ovens, vibrating fluidized bed dryers and other products, manufacturers are more focused and more competitive. The drying equipment industry is engaged in the development of small businesses, new products, and the perfect introduction of new products is mainly to imitate each other. It is recommended to develop advanced technology and improve product quality. Compared with developed countries in the world, there are still some gaps in the same industry. The current market is dominated by products with lower technical content. China's accession to the WTO will have more international counterparts entering the domestic market, and with increasingly serious international competition, we will face tremendous competitive pressure. The world's leading manufacturers of drying equipment, such as Danish Nile Group Co., Ltd. Daheyuan Japan has set up branches in China one after another to seize the Chinese market. With the acceleration of economic globalization, more companies will target the Chinese market. Increasingly fierce competition requires us to pass the advancement of the company, absorb foreign advanced technology, innovate and improve product quality. The idea of ​​product development to large-scale equipment, control of automation, quality, surface treatment equipment, selection of anti-corrosion materials, development of multi-functional combination machines, product life cycle continues to extend. Industry associations should organize more companies to participate in international technology exchanges and absorb the results, the latest technology to accelerate the entire industry to improve the technical level. Adjusted enterprises, cultivating the core competitiveness of enterprises in China is characterized by the fact that enterprises in the dry industry do not do this, are not strong, are not suitable, not perfect, but the overall quality is not high, most enterprises are backward in management and do not meet the corresponding economies of scale. Change the situation of blind development through the guidance and coordination of industry associations.
Jiangsu, Zhejiang, Shanghai, to a relatively concentrated set of three companies can consider using the joint venture, cooperation and acquisition of the central and western regions to migrate to find a wider space to survive and develop businesses. Industrial enterprises have taken the lead in the industry, and have cultivated some technical strengths, large companies and enterprise groups with well-known brands and independent intellectual property rights. Formed its own featured products and special services. Dry equipment manufacturing companies in China have relatively low innovation capabilities, launching new technologies with independent intellectual property rights, new products, and a few companies, which are slow and important reasons for the slow development. At present, there are dozens of universities, research institutes engaged in research and development of drying technology, located in eastern, western and southern China, most of the knowledge results are not effectively translated into real productivity. The main body of technological innovation should be directly related to the various forms of alliance between these universities and research institutions. Therefore, rational resource allocation and use can effectively cultivate and develop innovative capabilities. Looking ahead to the competitiveness of the dry equipment industry, the focus will be on product quality, technology, service and price. Types of equipment in dry, hot air will dry air heating equipment, vacuum drying equipment based, other equipment, such as far infrared drying, flash dryer microwave drying equipment and other special fields users will also gradually expand the number of applications.
The demand for large standard equipment in food, pharmaceutical drying, vacuum freeze drying equipment will increase, the demand for combined functions (such as granulation drying, drying-filter) equipment will increase, and high-automatic drying equipment will be subject to some applications. welcome. In addition, the emergence of drying equipment will have more and more attention to quality, corrosion equipment and drying equipment and reliable performance, will be of particular concern to users. At present, the drying equipment industry has begun to enter a more mature stage of development, which can better meet the actual needs of users in various fields. The price of foreign similar products is only 1/3, which makes drying equipment import equipment in China more than in the market competition. The price has obvious advantages; on the other hand, most of the larger drying equipments involve on-site installation, commissioning and after-sales service, and more choices and conveniences are selected for domestic users and imported equipment for domestic equipment. In the international market, China's accession to the WTO, drying equipment is more conducive to expanding exports. At present, China's main export products are vacuum drying equipment drying equipment, drying equipment, vibration, small and medium-sized food, agriculture, forestry, food and local products drying equipment, annual export volume of more than 100 vehicles, mainly exported to Southeast Asian countries and other developing countries. The country has opened its doors to the European and American markets. At present, China's exports account for less than 5% of the total dry equipment drying equipment. Experts predict that the total dryness of drying equipment for export products during the 10th Five-Year Plan period will exceed 10%. International competition, the main competitors of drying equipment manufacturers in China are Denmark, Switzerland, the United Kingdom, Germany, the United States and Japan. Compared with competitors, the advantages of drying equipment in China are very cheap, mainly due to the lack of control, automation of the product, appearance quality, feature set and combination of areas have been further improved. Therefore, domestic drying equipment manufacturers should make full use of China's accession to the WTO, strengthen technical exchanges, learn from foreign countries and learn from foreign advanced drying equipment, drying equipment to accelerate the improvement of China's automation and control, the quality of appearance, Feature sets and combinations, and shrinking products with foreign countries to improve the trust of our products in the user, therefore, drying equipment in China, not only in the domestic market, but also in foreign markets. China is increasingly producing varieties of drying equipment, expanding the scale, level and quality of products rapidly increasing, and more and more market competitiveness. In particular, the Chinese government supports export-related policies, producing dry equipment to create good external conditions for domestic companies, which indicates that China's development prospects are good for drying equipment.
Common knowledge of drying equipment: Common pre-dryers have common spray dryers, air dryers, fluidized bed dryers, flash dryers, fluidized bed dryers, such as spray granulation. Flash Dryer Spray Drying Spray drying is one of the most advanced equipment in drying equipment. Three types of atomization in the conventional method: rotary atomization, pressure atomization, and airflow atomization. Rotating Atomization Features A large spray drying capacity (up to 200 tons per hour) will be responsible for ease of control, operational flexibility, and wider application. Pressure atomized spray drying is characterized by coarse particles that can be created for future repairs. Since the nozzle holes are small, they are easily clogged and the liquid must be strictly filtered. The nozzle holes are easy to wear and the use of wear resistant materials. There is also a new structure for nozzle pressure called a pressure-flow nozzle. It features nozzle pressure and air gap nozzles in the surrounding environment. The atomization is divided into two phases: the first liquid film pressure nozzle is formed, and the film is the second air atomization, thereby making more small water droplets. The advantage of this type of nozzle:
(1) Adjusting the pressure of the compressed air, the droplet diameter can be adjusted, and the operation is simple;
(2) Production, high viscosity liquid, which can atomize droplets fine; 3 If you disable compressed air, the original pressure nozzle can be used. The atomizing airflow of the laboratory and the main plants in the Middle East, its power consumption. The first two liquids that cannot atomize the nozzle use an air atomizable nozzle. High viscosity paste, paste and filter cake materials for three-fluid nozzle atomization. The drier air flow drying technology is mature, if the operational data can be designed directly. Currently, a large number of drying equipment manufacturers are able to provide this type of equipment. Fluidized bed dryer fluidized bed dryer spray dryer. The feeding arrangement is divided into a partial fluidized bed dryer agitator and a heat transfer fluidized bed dryer. When unity is easy to use fluidized bed drying, or agglomerated powder material feed more water will flow into the above difficult phenomenon, this time set up the feed mixer to the above situation, eliminating bundle problems to achieve normal flow. The latter is a combination of heat transfer and convective heat transfer, when the amount of hot air flowing normally is not enough in the country to meet the required heat drying use of the heat exchanger, supply part or most of the heat, what type Operation can save a lot of energy. Take many forms of heat exchangers. Fluidized bed drying is also often used in combination with dry secondary education and higher education. The implementation of the ordinary vibrating fluidized bed said that the vibrating fluidized bed. There are two types of vibrating vibration sources that can be divided into two types: one is a vibration motor drive, and the other is an ordinary motor that generates vibration through an excitation box to make a spring. When vibrating, the size of the bed, the latter is better. In the process of fluidized bed spray granulation dryer, fluidization technology, atomization technology and dry organic combination are three. It is the seed that will atomize the spray liquid into the fluidized bed, so the seeds continue to grow and dry to reach the desired size, the time beyond the catapult. The device's small and large production capacity creates large particles. The industrial application of this device has been increasing. 
The current needs of the United Nations, conventional drying equipment in the domestic market, and major international market drying equipment are basically manufactured in China, which indicates that the history of importing oriented equipment for drying equipment in China is over. However, there are still some problems and difficulties. According to the China General Machinery Drying Equipment Industry Association, in the next few years, China's demand, the chemical industry will be about 3,000 sets of drying equipment; the annual demand for pharmaceutical drying equipment will reach 3,000 (sets); agriculture, forestry , food, light industry and other industries, such as drying equipment, the annual demand is expected to reach about 5,000 (sets). At present, the domestic market share of drying equipment has reached more than 80%.