About this double wheel caster wheel, we use High quality chrome plated bracket to produce it. And its Single wheel is TPR material. The capacity is 70 kg.
Twin Wheel Caster,Caster Wheels,double wheel caster, double wheel caster wheel Yangjiang Xingyang Industry & Trade Co.,Ltd. , https://www.xycaster.com
In order to give full play to the bearing and long-term to maintain its due performance, must be properly regular maintenance (regular inspection). Through proper periodic inspection, it is very important to improve the productivity and economy by early detection of faults and prevention of accidents. 1, cleaning the bearing removed the inspection, the first use of photography and other methods to make a good appearance record. Also, check the amount of lubricant remaining and sample the lubricant before cleaning the bearings. a, bearing cleaning points washed and fine wash, and the bottom of the container can be placed on a metal grid. b, rough wash, remove the grease or adhesive in the oil with a brush. At this time if the bearing rotation in the oil, pay attention to damage due to foreign bodies rolling surface. c, fine cleaning, slowly turning the bearings in the oil, to be carefully carried out. Commonly used cleaning agents are neutral, non-aqueous diesel or kerosene, sometimes depending on the need to use warm lye and so on. No matter what kind of cleaning agents, should always be filtered to keep clean. After cleaning, apply anti-rust oil or anti-rust grease on the bearing immediately. 2, inspection and judgment In order to determine whether the removed bearings can be re-used, we should focus on checking its dimensional accuracy, precision, internal clearance and with the surface, raceway, cage and seals. On the test results, can be used to master the bearings or proficient who judge. The criteria for judging vary depending on the mechanical properties and the degree of importance, the inspection cycle, and the like. If the following damage, bearings can not be re-used, must be replaced. 1) bearing parts of the fracture and defects. 2) raceway rolling surface of the peel.