MT Series PCB loaders and Unloaders are equipment used to load and unload PCB in SMT production line during production process. We offer various types and models of PCB Loader and unloader machines to suit any production requirements that any production line requires. MT series loader and unloader system includes Smart unloaders are capable of separating OK and NG PCB. Intelligent unloader is the ideal equipment to link after Automatic Inspection Machines. For more information about MT Series Loader and Unloader machines, you can get in touch with us or Visit our official website for our product catalog. Pcb Loader Machine, Pcb Magazine Loader, Pcb Magazine Unloader, Automatic Pcb Unloader,Automatic Pcb Loader,Pcb Loader ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com
Precautions on use: Rolling bearings are precision parts, its use must be accordingly careful. No matter how high-performance bearings are used, they do not give the expected high performance if not used properly. The precautions for the use of bearings are as follows. 1. Keep the bearings and their surroundings clean. Even the small dust that can not be seen by the eyes can have a bad influence on the bearing. Therefore, to keep the surrounding clean, so that dust will not invade the bearings. Use carefully. In use to give a strong impact on the bearings, will produce scars and indentations, as the cause of the accident. In severe cases, will crack, fracture, it must be noted. 3. Use the appropriate operating tools. Avoid replacing with existing tools and use the right tools. 4 should pay attention to bearing corrosion. When operating the bearings, the sweat on your hands can become a cause of rust. Should pay attention to clean hands, it is best to try to bring gloves. In order to maintain the original performance of the bearing in good condition for as long as possible, maintenance and overhaul are required to prevent accidents before they occur, ensuring the reliability of operation and improving the productivity and economy. Maintenance of the best corresponding mechanical operating conditions of the operating standards, on a regular basis. The contents include the monitoring of operational status, replacement or replacement of lubricants, regular disassembly inspection. As a maintenance item in operation, there is bearing rotation noise, vibration, temperature, lubricant condition, and the like.