Fiber optic waterfall lighting is a new creative lighting.It is un-replaceable because of its special design and lighting effect. Fiber Optic Waterfall,Fibre Optic Waterfall,Led Fiber Optic Curtain,Fiber Optic Wall Jiangxi Daishing POF Co.,Ltd , https://www.opticfibrelights.com
Painting Environment Temperature and Humidity Epoxy floor coating is usually used in 5-45 °C environment. Outside this range, specially formulated epoxy floor coatings or other types of floor coating with good low temperature curing property are required;
For solvent-free epoxy floor coatings, in order to obtain a suitable drying time and drying speed, it is recommended to use the summer type at above 20°C, and below 20°C, it is recommended to use the winter type.
During the coating and curing process of the floor coating (especially the top coat) (before surface dry), the surface temperature of the substrate should be higher than 3°C above the dew point to prevent condensation on the surface of the substrate and the wet film to affect the coating adhesion and surface. effect.
A surface thermometer is used to measure the temperature of the substrate, a temperature and humidity meter is used to measure the temperature and humidity of the coating environment, the dew point can be found according to the temperature and humidity, and the dew point is compared with the measured surface temperature of the substrate to ensure that the surface temperature of the substrate is higher than the dew point 3 °C or more.
Other requirements to avoid cross-operations;
Moderate ventilation, but wind and dust should be prevented.
2. After the construction of the floor maintenance floor is completed, it needs to be maintained for 3-7 days before being put into use. During the curing period, water or other solution shall be prevented from infiltrating the surface; the hard materials such as steel wheels shall be avoided; the bright floor coating shall be avoided. Regular waxing and maintenance, anti-static floor should be used as static guide wax; daily cleaning can be wiped with a wet rag or neutral detergent cleaning.
It is widely used in hotel, night club,wedding,bar, entertainment center and home decoration etc.
Sparkle Fiber Optic,it is processed from plastic bare fiber optic,widely used at Led fiber optic curtain, fiber optic chandelier, and something other place
1. Construction environment requirements Base material moisture content When the base material moisture content is above 6%, non-aqueous epoxy floor can not be constructed;