LG Sigma Elevator Spare Parts, LG Elevator Spare Parts, Sigma Elevator Spare Parts
Sigma
Elevator Company is a subsidiary of Otis Elevator Korea (OEK) in South Korea
for all overseas/export markets. It was founded in 2000.
Starting
in 1968, "Goldstar" elevators, and later on, "LG"
elevators, were counted among the world's top elevator brands. With the
beginning of this new millennium, that legacy lives on through the birth of
"SIGMA" elevators.
SIGMA
Elevator Company will continue on with its mission of supplying elevators and
escalators to more than 50 nations worldwide through its global network of 11
sales companies, 2 offices, and 52 agents or distributors.
SIGMA
Elevator Company is dedicated to providing its customers with the best quality
products and services. SIGMA elevators feature unmatched safety, ride comfort,
and modern design. SIGMA escalators and moving walkways are held to similar
safety and comfort standards and are integral parts of our modern urban
aesthetics.
Changwon
factory, Korea, the main factory of SIGMA Elevator, has long been a well-established
name in the global elevator industry. SIGMA`s Dalian factory in China produces
elevators & escalators to meet the demands of the local and worldwide
markets as well.
SIGMA
Elevator Company is committed to increasing customer value through a sharp
focus on product innovation and customer satisfaction. With technology
developed over the past 30 years, an enduring innovative spirit, and
enthusiastic attitude towards providing customer value, Sigma Elevator Company
stands by its product and service lines with confidence.
Sigma
currently has businesses in more than 75 countries worldwide, and subsidiaries
in five countries; Hong Kong (China), Vietnam, Thailand, Malaysia and
Singapore.
In
the United States, Sigma elevators were distributed by CemcoLift, which was a
historic elevator company bought by Otis and based in Hatfield, PA. However, in
2012 CemcoLift has gone bankrupt and replaced by a new company called Minnesota
Elevator Solutions.
It's
headquarter, factory and testing tower are located in Changwon, South Korea,
which are also operated by Otis Elevator Korea. It also has a secondary factory
in Dalian, China, opened in 1998 to meet demands on Chinese elevator market.
In
2014, Sigma had a partnership with EXPRESS Elevator Co., Ltd., an elevator
company based in Suzhou, China as well as a subsidiary of Otis. In 2016,
Express/Sigma opened their headquarters in Suzhou, China
LG
Elevators was the elevator and escalator division of LG Electronics. It was
acquired by Otis in 1999 and was later known as LG-OTIS Elevator Company.
LG
changed its name from GoldStar in 1994 after GoldStar merged with Lucky
Chemical. In 1999, it was acquired by Otis Elevator Company, later known as
LG-OTIS Elevator Company from 2000 until 2003, when it was renamed to OTIS-LG
Elevator Company. Later in 2006, OTIS-LG was again renamed to Otis
Elevator Korea.
LG-OTIS
Elevator Company (later OTIS-LG Elevator Company then Otis Elevator Korea) was
a joint venture company between Otis and LG Electronics` elevator and escalator
division, LG Elevators in South Korea. It was formed in 2000. The brand was
renamed to OTIS-LG Elevator Company in 2003 and later Otis Elevator Korea in
2006, where it is currently known as that in South Korea
LG Sigma Elevator Spare Parts, LG Elevator Spare Parts, Sigma Elevator Spare Parts CEP Elevator Products ( China ) Co., Ltd. , https://www.zjsmartcommercialescalators.com
In just over four months, Changchun CNC Machine Tool Co., Ltd. successfully developed two CX-12 double-head phase friction welders and XK9360 ball-channel CNC milling machines, which are currently unable to produce important equipment in China, thus serving China's equipment manufacturing industry. Independent innovation has contributed.
The double-head phase friction welding machine is currently produced in only a few developed countries in the world. There are no manufacturers in China, and even users are rare. This type of equipment is mainly used in the production of automotive transmission shafts, which have the advantages of high efficiency, good quality and no pollution. Especially with the development of China's automobile industry, the demand for double-head friction welding machines is growing. Importing a double-head friction welder from abroad requires nearly 10 million yuan, and the friction welder developed by the company is only one-eighth of the price of foreign products, and the quality level is not inferior.
The XK9360 ball channel CNC milling machine is an urgently needed special equipment for machining the universal joint in the automotive industry. The CNC milling machine developed by the company has high precision and high efficiency, good stability, can be milled and milled, and the price is lower than imported products. It is reported that the above two new equipment will be unveiled at the 8th China Machine Tool Trade Fair.