First, the application equipment and dosage can be harvested type-5 or harvest type-10 hand powder sprayer, requiring the wind speed of the nozzle to be more than 8 meters per second. The harvesting speed of the Harvest Hand-5 type hand crank should reach 36 rpm, and the Harvest type-10 should reach 50 rpm. The purpose is to produce a strong enough wind to make the powder evenly discharged. The amount of powder discharged is adjusted to be about 200 grams per minute. Generally, 1 kg of dust is used per acre, and it takes only 5 minutes to process 1 mu of greenhouse. centrifugal pump beed used to transfer the thin liquid, like: water, diesel oil, fuel oil, gasoline etc. we have single stage centrifugal pump and multistage centrifugal pump. Multistage centrifugal pump is be used to transfer water, it's also be called boiler feed pump, pump have large flow rate and high head. single stage centrifugal pump have water pump and oil pump. CYZ series pumps is one kind of self priming centrifugal pump, it's can transporting diesel fuel oil, gasoline, kerosene etc light oil, also can be used tansport sea water, because pump have bronze imepller, it's both explosion-proof and seawater resistant. IS/ ISW/ ISG all horizonal and vertical single stage centrifugal water pump, it's be used to transfer clean cool water and hot water, also can be used to transfer sea water. we also have one good product, it's high temperature hot oil pump, this pump can be used to transfer high temperature reach to 350 degree hot oil. Simple structure, durable. Centrifugal Pump,Centrifugal Water Pump,Multistage Centrifugal Pump,Vertical Centrifugal Pump Hengshui Yuanhan Trading Co.,Ltd , https://www.yuanhanpump.com
Second, the preparation of the shed before the dusting before the dusting the vents and doors of the shed, close the shed with a plastic film, as far as possible to achieve a closed state, if the plastic film has small pieces of damage to the dust has no effect.
Third, the best time to spray powder during the dusting time is morning or evening. The cockroach has not been uncovered or just closed after the shed, so the deposition rate of the powder on the crop is higher. Noon should be avoided at noon on sunny days, and powder can be sprayed at any time on cloudy days. Ventilation can be turned on two hours after dusting. Spray once every 7 to 10 days according to the condition.
4. Powder spraying method Greenhouse: Using the horizontal spraying method of retreat, that is, starting from the inner end of the greenhouse, the operator stands on the aisle, facing away from the north wall of the greenhouse, facing the south side, while spraying air on the side, while retreating, until exiting the doorway ,Close the door. If there is any remaining medicine, the powder spray pipe can be inserted into the room from the upper air outlet to spray, until the remaining powder is sprayed. Greenhouse: The left and right air swinging method is adopted. From the north end, the operator stands on the aisle and swings the powder pipe to spray powder on the left and right sides. While spraying, it retreats until it exits the door of the south end and closes the door. Medium and small arch shed: The shed is sprayed, that is, the shed is uncovered on the side of the shed or on different sides of the shed, and the powder spray pipe is inserted into the shed for spraying, and the nozzle swings left and right.
V. Powder spraying points and precautions When spraying powder, the powder must be sprayed evenly into the space of the booth. It is not advisable to spray the powder spraying tube to the plant line by line, otherwise the deposition will be uneven. The operation should be in accordance with the pesticide safety operation rules. It is required to wear long-sleeved overalls, goggles, masks and protective caps. The hands and other exposed skin must be cleaned after work.