Furniture brushed with paint, in order to prevent the paint from cracking when exposed to the sun Decorating Tools,Smart Roller,Fillable Paint Roller,Patterned Paint Roller Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com
The correct and stable operation of the heat transfer oil pump is conducive to the smooth operation of the heat transfer oil pump and the extension of the service life. Here is a brief introduction to the starting and operation of the self-priming pump: First, pay attention to the correct steering of the pump shaft when moving the heat transfer pump . Second, the heat transfer oil pump operation should pay attention to the pump shaft rotation without abnormal sound and vibration. Third, pay attention to the pressure gauge and vacuum gauge readings, since the pressure gauge and vacuum gauge after reading indicates stable, then the heat transfer oil pump has been on the liquid and into the normal infusion operation. Fourth, in the heat transfer oil pump into the normal infusion operation is self-absorption process, pay special attention to heat transfer oil pump in the water temperature rise, if the water temperature is too long, the pump temperature is too high, Stop the pump to check the reason. Fifth, the heat transfer oil pump in the course of the work if for some reason to stop the pump, need to restart, the outlet control valve to be slightly open, so conducive to heat pump in the self-priming process of gas discharge from the discharge port, but also to ensure that the tip Under the lighter responsibility to start.