Q: When using a rain shower, I found that the water is not a jet of fine water. In some places, it is a thick water column. What should I do? A: There are two reasons why the shower water becomes thick and fine mixed water. First, the shower spray method of your home is adjustable. You can adjust the nozzle rotation. If it is not the cause of the adjustment, the dirt in the nozzle is too If it is caused by a small round cap in the middle of the nozzle, use a small flat-blade screwdriver to open it, use a Phillips screwdriver to screw down the screw, open the shower, rinse with a water brush, brush the shower hole with a toothbrush, and then install the restore. Q: When the shower is used for a long time, it will often block, some holes will come out of the water, and some will not come out. What should I do? A: There are two types of shower spouts on the market. One is hard material. Only clean the needle to remove dirt when cleaning. There is also a soft material, usually silica gel, which can be removed by hand. The latter is recommended. However, due to the different quality and grade of silica gel, you should ask carefully when purchasing. There are many ways to design stone carvings. Relief: carving a three-dimensional image on the stone surface, which is a semi vertical sculpture. Because the image is embossed on the stone surface, it is called relief. According to the depth of the stone surface, it can be divided into shallow relief and high relief. Shallow relief is a single level statue, which has a single content and is not hollowed out. High relief is a multi-level sculpture with complicated contents. It is more attractive to use openwork techniques to hollow out. The reliefs are mostly used for the wall decoration of buildings, as well as the dragon columns and holding drums of temples. Marble Sculpting,Marble Sculpting Process,Modern Marble Sculpting,Marble Sculpture Art The universe in the stone is great , https://www.zdsarts.com