Led Down Light,Smart Led Downlights,Led Surface Downlight,Trimless Led Downlight OLAND PHOTOELECTRIC TECHNOLOGY CO.,LTD. , https://www.olandlights.com
Cryogenic pump installation and operation requirements (1) installation of cryogenic pump, the pump parts must be washed with a solvent, dry and then assembled, non-stained with water and grease. Today's latest valid order information free to send! Morning latest buyers information free to send! Punch grab Rob here! (2) The cryogenic pump itself and the suction line of the pump are to be provided with cold-keeping measures to prevent the liquid from being vaporized during the operation by absorbing heat from outside and affecting the suction performance of the pump. (3) The cryogenic pump and its device should be cleaned before being put into operation, then cleaned with dry nitrogen, etc. to remove moisture and air from the pump and precool. (4) The suction inlet and suction pipe of the cryogenic pump should have the exhaust device, so that the accumulating gas can be excluded in time before or during the operation so as to ensure the reliable operation of the cryogenic pump.