PH-B-L5
Phlizon 1000w/1500W/2000w /2500W/3000w COB LED Grow Light, it will give you more options when your plants need different strength of illumination.
Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED Grow Lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.
1000w 2000w 3000w 1500w led Grow Light Features
Indoor grow light
COB series, high power branded CREE COB with high Par value and deeper penetration
VEG/BLOOM and STRONGER switches for each grow stage.
Special spectrum for plant growing to increase the yield.
Building to Harvest: Beneficial for seeding to fruiting stage.
Good quality fans with low noise.
Easy to install by minute
Energy Saving, environmental friendly
3 Years Warranty
We are a professional Chinese manufacturer of PH COB Series, and look forward to your cooperation!
PH-B-L5 Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumgrowlight.com
Gear pump is to use two gears to rotate each other to work on the medium less demanding. General pressure below 6MPa, larger flow. Gear pump in the pump body is equipped with a pair of rotary gear, an active, a passive, relying on the two gear meshing with each other, the entire pump cavity divided into two independent parts. A for the inhalation chamber, B for the discharge chamber. When the gear oil pump is in operation, the driving gear drives the driven gear to rotate. When the gear meshes and disengages, a partial vacuum is formed on the suction side (A) and the liquid is sucked in. The sucked fluid fills each tooth valley of the gear to the discharge side (B), and the liquid is forced out when the gear enters into engagement to form a high-pressure liquid which is discharged outside the pump through the pump discharge port. Gear pump structure diagram Gear pump Features 1. Compact, easy to use and maintain. 2. Has a good self-absorption, so every time you open the pump without filling the liquid. 3. Gear pump lubrication is delivered by the liquid automatically reached, so do not have to add daily oil lubrication. Gear pump is widely used in petroleum, chemical, shipbuilding, electric power, grain and oil, food, medical, building materials, metallurgy and national defense research and other industries. Gear pump for conveying solid particles and fibers do not contain, non-corrosive, the temperature is not higher than 150 ℃, the viscosity of 5 ~ 1500cst of lubricating oil or other properties of similar lubricants liquid. Try all kinds of room temperature freezing and freezing in the outdoor installation and process requirements of insulation occasions.