In summer, the weather is hot, bacteria are more likely to breed in this hot and humid environment, and household appliances are a breeding ground for them. For the maintenance of home appliances, most people are doing "surface work", and rarely go deep inside to clean. If you don't thoroughly clean the interior, then the impact is not only beautiful, but healthy. Recently, Xiao Bian has collected several common senses of small appliances used in the market, and brought you a thorough cleaning of small appliances. Juicers or soymilk machines are used by many families, and some families still use them every day, but these two machines are inconvenient to clean and difficult to complete. Juicer or soymilk maintenance â—After pressing the juice or after finishing the soy milk, use a scouring pad or a small old toothbrush to clean the machine's cutter head, filter, etc., and do not let the pomace, bean dregs and other debris condense, otherwise it will give the next The cleaning brings trouble. â— Add 1/3 warm water and detergent to the mixing vessel, plug in the power for 30 seconds, then rinse with water. If the cutter head is used for ground meat, the remaining hoe is put into the mixer and stirred in the mixer to effectively absorb the residue such as minced meat. â— If used frequently, the plastic cups of the juicer and soya-bean milk machine will turn yellow for a long time. If you encounter this problem, you can use a small piece of dough and a little detergent to rub it repeatedly. â— The cleaning of the juicer or soymilk shell is relatively simple. Wipe it with a rag. Remember not to rinse with water or scrape with a hard object. The base of the juicer or the nose of the soymilk machine should not be immersed in water to prevent the insulation of the motor from being damaged. Microwave ovens are the most vulnerable places to hide dirt. Oil droplets splashing or splashing food residue at high temperature will stick to the ceiling of the furnace chamber, which will not only affect the subsequent food hygiene, but also spark or smoke, which will increase the electromagnetic radiation. Therefore, it should be cleaned regularly. Microwave maintenance â— Unplug the power plug, use a soft cloth to pick up the warm water containing the neutral detergent, and wipe the internal surface of the microwave oven, the front and back of the oven door and the opening of the furnace door. Do not use a metal brush to avoid scratching. â— If there is too much fouling, you can use a special container for microwave oven to heat the lemonade for a few minutes, first let the evaporated water moisten the furnace, then wipe the stain with coarse toilet paper, then use double-effect scouring pad to wash the oil. Wipe thoroughly. Need to be careful, after that, use a sponge cloth with a clear water to rub it several times. Do not let the detergent remain in the furnace. Otherwise, when the food is heated, the residual detergent will become the mist attached to the food. Finally, dry it with a dry sponge cloth. To prevent damage to the furnace components, do not allow water to seep into the vents. â— Remove the cooled turntable and turntable bracket, wash with warm soapy water, and then rinse with water. After cleaning the turntable and collar, remember to reset as they are to avoid noise. â— Clean the door seal of the microwave oven and use a soft cloth that is slightly damp. If sand is embedded in the rubber door seal, use a dry soft toothbrush. â— Put the orange peel or lemon peel into a clean microwave oven and heat for 15 to 30 seconds to remove the odor in the microwave oven. After using the induction cooker for a period of time, it is easy to fall on the stain on the panel. If it is not cleaned in time, it will become stubborn grease, then it will take some time to work. Induction cooker cleaning â— Pull the plug until the furnace surface is completely cooled. Wipe the exhaust fan and vents in the induction cooker to ensure that the ventilation inside the induction cooker is smooth and prevent the induction cooker from overheating. This part can be wiped with a soft dry cloth to extract alcohol, but wait until the alcohol has evaporated before using the induction cooker. If the vent is dusty, clean it with a soft toothbrush or cotton swab. Do not rinse with water. â— Wipe the induction cooker panel, wipe it with a decontamination powder or a neutral detergent, and wipe it with a damp cloth. If the scale is heavy, wipe it with a toothpaste and then wipe it with a soft, damp cloth. Note that the furnace surface that has just been used should not be wiped with cold water immediately, so as to avoid the hot and cold reaction and crack the panel. Coffee is rich in minerals, and the accumulated minerals can clog the coffee outlet. If you prefer to brew coffee with mineral water, or if you use it frequently, it is best to wash it two or three times a month. Maintenance of the coffee machine â— Make sure the coffee machine is turned off, and the body is not hot. Wipe the outside of the body with a damp cloth, sponge or soft scouring pad. Do not use a sand scouring pad or a steel ball, which will scratch the outer casing of the coffee machine. â— Do not directly immerse the kettle body in water. Instead, remove the filter, filter, glass bottle and cap, and wash with warm water and detergent. A soft toothbrush can be used if necessary. â— Clean the inside of the coffee machine. 5 tablespoons of white vinegar and 5 cups of water, pour into the coffee machine, and then operate as usual, brew the coffee, let the water mixed with vinegar, drip into the glass bottle through the filter. Repeat this procedure twice. Finally, cook again with 5 cups of water to clean. When ironing clothes, due to improper temperature control, etc., the bottom plate will be stained with a layer of char, which should be cleaned up in time, otherwise it will accumulate more and affect the ironing effect. Maintenance of electric iron â—Electric iron is energized and preheated to 100 °C, then cut off the power supply, apply a small amount of soda powder or decontamination powder to the bottom layer of the char, and wipe it off with a clean cotton cloth to remove the dirt. â— Smudge on the iron surface, after the iron is heated, wipe it with a damp cloth. â— If you find that the water in the steaming iron tank is turbid, you can use white vinegar and water to inject into the water tank for a few minutes, power off, shake and clean. After washing the vinegar, wash it several times with water. If there is white powder in the exhaust hole, use a needle to clear it. After cleaning, be sure to drain the remaining water in the tank. If it is found to be unclean, start the iron and use up the excess water. The water dispenser has been used for a long time, and scales will be generated in the body. It is also possible to breed bacteria. Drinking such water has a self-evident effect on the body. Maintenance of the water dispenser â— Remove the plug, remove the water bucket, open the drain pipe (usually a white plastic knob) behind the water dispenser, and drain the remaining water. Then, turn on the hot and cold water switch to release the water. â— Remove the “smart seat†(that is, the part of the water dispenser that touches the mineral water bucket), carefully scrub the inner and outer sides of the water dispenser liner and lid with alcohol cotton to prepare for the next disinfection. â— According to the instructions of the decontamination effervescent tablets or disinfectant, sterilize the water and introduce it into the water dispenser so that the disinfection water fills the entire cavity and is left for 10 to 15 minutes. However, it is recommended to pour a little white vinegar or freshly squeezed lemon juice from the water inlet, then fill it with water and leave it for two hours, so that you don't have to worry about the harm caused by detergent residue. â— Turn on all the switches of the water dispenser, including the drain pipe and the water switch, and drain the disinfectant or vinegar. â— Rinse the entire chamber of the dispenser continuously with clean water. It is recommended to move the water dispenser to the bathroom to ensure that the water is abundant and open all the switches to clean the flushing liquid. â— Use a cotton ball to pick up the alcohol to clean the water dispenser casing, or use a white vinegar dilution to scrub. The humidifier can bring us moist, healthy room air, especially suitable for winter heating in the north. However, if the humidifier is cleaned and cured, microorganisms such as mold in the humidifier will diffuse into the air and then enter the human respiratory tract, causing various diseases, which will not be worth the loss. Maintenance of the humidifier â— Turn the power switch on the main unit to “OFF†and unplug the power cord. Before extracting the water tank, drain the water inside the main unit, otherwise the water will easily flow into the inside of the machine and damage the parts. â— After using the humidifier for a period of time, the calcium and magnesium ions in the water gradually precipitate to form scale. Dissolve 5 ml (about 1 cap) of the special dehumidifier for dehumidifier with fruit acid as the main raw material in 300 ml of water, pour into the main tank and let it stand for 15 minutes to dissolve the scale. There is also an organic The easy way is to use white vinegar, which is effective and healthy. Use a soft brush to clean the area around the reservoir, but be careful not to hit the oscillator, as it may be damaged. When descaling, it is strictly forbidden to scrape the transducer with a hard object, which may result in no fog during the next use. â— Use a soft brush to clean the water level sensor. Be sure to clean the scale, otherwise it will cause blockage. â—Pour off the detergent solution in the water tank and wash the water tank with clean water. Never splash water into the air outlet. Cordless Miter Saw,Power Miter Saw,Cordless Chop Saw,Sliding Compound Miter Saw ZHENGYANG TECHNOLOGY CO.,LTD , https://www.supraone.com