Measuring Tape,Small Tape Measure,Custom Tape Measure,Personalized Tape Measure SHANGQIU CHAOYUE MEASURING TOOLS CO., LTD , https://www.equipmentool.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>What is the scrapping specification for sliding bearings? What is the scrapping specification for sliding bearings?
According to the different layout of the bearing, it is divided into the following types: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
First, the bushing 1) the inner diameter of the bushing exceeds the maximum value of the rule; that is, the shaft diameter plus the maximum allowable clearance of the bearing,
2) The outer diameter of the sleeve is smaller than the minimum value of the regular scale; and when the method of knurling is used, the quality requirement cannot be ensured.
3) When the shaft sleeve burns or holds the shaft.
Second, the split bearing 1) the bearing alloy is severely worn; when the thickness is reduced by 1/2 or more,
2) The bearing alloy layer is shelled; the crack is severe; when the area is more than 1/3,
3) The bearing alloy layer is severely burnt,
4) The contact angle between the bearing alloy and the shaft is greater than 120o; the contact angle cannot be adjusted by the method of scraping the tile surface or the side gap is too large to be adjusted.
Third, thin-walled tiles 1) bearing alloy layer is melted,
2) The bearing alloy layer is severely worn; the bite is attacked; when it cannot be tightened by the padding method,
3) When the bearing alloy layer is shelled or cracked,
4) The wear of the bearing alloy layer is not too severe; however, when the inspection distance is not ensured,
5) bearing alloy layer wear; need to use padding method to tighten the bearing; but the thickness of the gasket exceeds 0. 5mm.
4. Thrust bearing 1) The thrust pad is severely worn; when the thickness is reduced by 1/2 or more,
2) When the thrust pad is melted,
3) The thrust pad is unshelled and cracked.
Recommend to friends comments close window Bearing related knowledge The function and use of ntn bearing's disassembly and tamper protection method
10 elements selected by KOYO Bearings
NSK bearing corrosion control and elimination skills extend the use of cycle slewing bearing layout
This article links to http://
Please indicate the bearing network http://
Previous:nsk bearing oscillation diagnosis next edit: commonly used bearing differentiation
Source: China Bearing Network Time: 2013-04-04