Mom and Dad will feed the baby to a baby crib in order to let the baby have a small world. Most of the time the baby has not yet been born, the prospective parents will start to choose the crib for the baby. In the end, does the baby need a crib? How to buy a baby cot? These problems are actually not clear to them, so there is always no suitable crib. Carter Villa furniture has to start to spread all aspects of the crib about everyone, then let's take a look! First, the classification of cribs According to the material is divided into: wood, solid wood and so on. Second, the evaluation of the crib 1. Evaluate whether the product meets the safety standards set by the state and whether the coating is non-toxic. 2. Evaluate whether the bed edge fence is firm, whether the distance between the fences is moderate, and whether there are too many patterns on the top (hooking the children's clothes). 3. Evaluate whether the surface of the bed is coated with a protective layer that prevents cracking. 4. Evaluate whether the mattress has a fixed card lock function (ie, the child cannot lower the bed edge by himself). 5, to evaluate whether the bed has a yarn account design, to block mosquitoes for infants and young children. Third, the choice of cribs 1. For safety reasons, it is necessary to ensure the fit of the mattress to the bed to ensure it is strong. There should be no gap between the bed and the mattress. Follow the "one finger principle". If you can put two or more fingers between the bed and the mattress, the mattress is too small. A mattress that is too small or too soft will increase the risk of sudden infant death syndrome, stuck or suffocation. 2, the guardrail height of the crib should be more than 50 cm. At this time, the child loves to move and is unstable, not afraid, especially dangerous. Make sure the rail gap of the bed is less than 6 cm. Exceeding this gap may cause the child to get stuck in it. A bed that allows children to easily see the outside through the bed will give them more communication and comfort. The height of the guardrail should be adjustable so that parents can't be too hard to bend over to hold the child. The position of the bed should also be adjustable. After the child is standing, the bed can be lowered to ensure safety. 3, the crib often needs to be lifted, so regularly check whether the crib screw is loose or missing, the stability of the bracket and Other hardware. When a baby reaches a long tooth, he likes to bite, and the bite-proof strip is very important. It protects the baby and protects the bed from being bitten. At the time of purchase, check that the railing can move easily and smoothly without noise. Wooden children's beds should be made of hardwood, such as maple, ash, eucalyptus or oak, colored with a safety-certified paint. The surface of the crib should be smooth with no sharp edges, spots and rough surfaces. Try not to choose a bed with a raised carved decoration, because it is easy to hook your child's clothes, and when the child tries to break free, there is a possibility of collision and injury. 4, the bed with wheels for easy replacement of sheets, and turn cleaning. The width of the bed should not exceed 75 cm. The crib needs to be moved flexibly between the bedroom, the living room and the dining room. After the width is exceeded, it is inconvenient to enter and exit the door. When the bed is in place, be sure to lock the bed to avoid possible hazards, especially when there are other children in the house. These children are very likely to accidentally push the bed while playing with the baby, such as pushing down the stairs, hitting the window or furniture. Master these purchasing skills, I believe that when the baby is born, Mom and Dad will not be so flustered, and do not have to worry about the bad influence on the baby. Refrigeration Tools,Value Refrigeration Tools,Best Refrigeration Tools,Refrigeration Tools List Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysonrefrigeration.com