Copper door purchase considerations quality and performance can not be ignored

The combination of aesthetics and practicality of the copper door is an ideal category. Buying a copper door is not only concerned with its price, quality and performance are equally important, what should be paid attention to the quality and performance of the copper door? Next, the small series will introduce the copper door purchase - quality and performance can not be ignored.

Copper door purchase considerations quality and performance can not be ignored

Inspection site 1: Carefully check the door lock to ensure its performance and structure

The anti-theft performance of the copper door is selected as the anti-drill lock. When the drill bit is drilled into the lock hole, the lock and the drill can be rotated synchronously so that the lock is not damaged. The brass door locks require a three-way locking structure to ensure safety and the door is not easily opened.

Inspection site 2: number of locks and number of plungers

It is best to choose two locks for the copper door, so that you can control the door of the plunger. Even if there is a destroyer, it will be more difficult to destroy and it will take a long time. In general, a lock can control three or four types of plungers, and its anti-theft performance is poor, but once the lock is damaged, the role of the plunger will also be lost.

Inspection site 3: The quality of the copper door is confirmed by the thickness and area of ​​the reinforcing plate around the lock

From the structural design point of view, the copper door can be divided into two types: closed type and fence type, but in any case, the main part of the theft damage is the lock. Therefore, a cold steel plate with a thickness of more than 2 mm should be selected as the lock core plate, and the height of the core plate should be not less than 500 mm.

Inspection site 4: View the process quality of the lock

The quality of the copper door is very much related to the manufacturing process. When purchasing, carefully observe whether the surface has welding defects, for example, whether there is open welding, unweld welding, leakage welding or slag inclusion. At the same time, it is necessary to check whether the cooperation between the door frame and the door leaf is dense, whether it can be flexibly opened, and whether the gap is uniform. In addition, the surface of the electroplated paint should remain uniform, firm and smooth.

The above content is the copper door purchase introduced by Xiaobian for everyone - quality and performance can not be ignored, I hope everyone can carefully check every detail, I believe you have mastered these inspection methods after reading this article.

Editor in charge: Wang Feiran