The lamps and lanterns are the most decorative items in the house decoration. Different styles of lamps used in different scenes can improve the taste of the whole house, but there are still many details in the process of installing the lamps that need our attention. The collocation of lamps is also very important. Next, Xiao Bian introduced the installation of lighting techniques and lighting maintenance.

Installing lighting tips

1, when installing the lamp, if you install the sub-control switch, you can save a lot of trouble. Because if there is only one master switch and several lights are on and off together, the light and darkness of the light can not be selected, and electric energy will be wasted, and a sub-control switch can be installed to select several lights according to needs at any time. If there is an aisle at the entrance of the house, it is best to install a switch at the end of the aisle so that the power can be turned off directly after entering the house without having to walk back to the door to turn off the lights.

2, the lighting system should be set to be adjustable, that is, when you feel the light is dim or dazzling, you can adjust, people will feel more comfortable and more comfortable.

3, the color temperature of the light should be consistent with the atmosphere of the room, at least to be similar to the color temperature of other areas of the room. Lamps can be installed in the uppermost place to reduce shadows during work.

4, do not only install a single lighting source in the center, in order to better lighting the kitchen, should be installed in the kitchen by a different lighting and light source composed of multi-level lighting system.

5, the installation site is also very important. Straight incandescent lamps or fluorescent lamps should be installed toward the front of the cabinet. In this way, part of the light emitted by the lamp will hit the rear baffle, and then it will be reflected on the operating platform and then shot toward the center of the entire space.

6, if the space is high enough, you can install a transparent or translucent chandeliers on the ceiling as a light source, chandeliers can not only provide excellent lighting, but also a very good decorative items.

7, the installation of lighting, the most important thing is to be solid, you can pull it, feel it.

8, the bottom cover of the lamp should be close to the ceiling, can not shake.

9, if it is a chandelier, there will be extended from the top of the wire to the lamp head, it should be noted that this wire can not be taut, it should be loosely wrapped around the lever to go, otherwise later this long-tight wire is very easy Problems.

10. Carefully check that there are no exposed wires.

11, In addition, many ceiling lamps have anti-scratch film on the top, need to be peeled off after installation, the exposed person knows, very difficult, in fact, there is a small trick, you can blow this film with a hair dryer, and then expose It can be peeled off very easily.

Lamp maintenance

1. After buying the lamps and lanterns, don't try to install them first. You should look carefully at the signs of the lamps and read the installation instructions. Then install and use the lamps according to the instructions. Otherwise, danger may occur.

2. Replace the aging lamp according to the light source parameters provided by the sign. If the lamp is red at both ends, the lamp is dark or dark, and the lamp does not light, replace the lamp in time to prevent the ballast from appearing. Burnouts and other unsafe phenomena;

3, in the cleaning and maintenance should pay attention to not change the structure of the lamp, and do not just replace the lamp parts, after the end of cleaning and maintenance, the lamp should be installed as is, do not miss the installation, misplaced lamp parts;

4, lamps in use must also strengthen the maintenance in order to extend its service life. The lamp of the room should always be wiped with a dry cloth, and be careful to prevent moisture intrusion, so as to avoid the phenomenon of rust damage or leakage short circuit for a long time; lights installed in toilets and bathrooms must be equipped with moisture-proof lampshades, otherwise it will greatly shorten the service life; Lamps installed in the kitchen should pay special attention to fumes, because the accumulation of grease affects the illumination of the lamps; light shades are better in light transmittance, but are easy to stick to dust, and should be cleaned frequently to avoid affecting the penetration of light; If the luminaire is non-metallic, it can be wiped with a damp cloth so as not to accumulate dust and hinder the lighting effect;

5. Do not switch as frequently as possible when using the lamp. Because the lamp is frequently turned on, the current through the filament is greater than the current during normal operation, so that the temperature of the filament increases rapidly to accelerate the sublimation, which will greatly reduce its service life. To minimize the lighting switch. Special reminds that wetness can easily lead to rust and paint loss, and shorten the service life of the luminaire. Therefore, moisture protection is the key to the maintenance of lighting, especially the bathroom, bathroom lighting and kitchen stove lamp, must install moisture-proof lampshades to prevent moisture intrusion, to avoid rust damage or leakage short circuit. It is best not to use water to clean the lamps. Just wipe it with a dry cloth and wipe it with water. If you accidentally touch the water, try to dry it. Do not wipe it with a wet cloth immediately after turning on the lamp.

Editor's summary: About the installation of lighting tips and maintenance of the lighting is introduced here, and I hope to help everyone. If you want to know more about yourself, you can follow the information on this site.

Op lighting lamps chandeliers bedroom lamps pictures living room dining room lamps indoor modern lamps installation lamps

Christmas Light

Christmas Light,Outdoor Christmas Decorations,Outdoor Christmas Lights,Christmas Tree Lights

Taiyaun JDS Machinery And Equipment Co., Ltd. , https://www.ccagoods.com

Posted on