Tank detection third-party organization Shi Min landline QQ mailbox @qq.com welcome advice! Inspection plan: 1. Inverting the tank: pour the liquid in the tank to be tested to another tank, and open the liquid phase inlet valve of the liquid storage outlet valve, the gas phase inlet valve and the other tank. The gas phase outlet valve opens the compressor, and the gas of the other storage tank is pumped to the tested storage tank, so that the liquid of the tested storage tank flows into the other storage tank until the liquid phase is completely poured into another storage tank. Stop the compressor and close the valve that was opened. 2. Extracting the gas in the tank: open the gas phase outlet valve of the test tank and the gas phase inlet valve of the other tank, turn on the compressor, and pump the gas of the test tank to another tank until the pressure in the tank is less than 0.1 MPa. Stop the compressor and close the valve opened above. Closet Cabinets,Closet Cabinets With Doors,Closet Cabinets With Drawers,Walk In Closet Cabinets Ningbo Oulin Import&Export Co.,Ltd. , https://www.oulin-oversea.com
3, water injection to remove the residual gas in the tank:
(1) Close the valves of the tank to be in and out of the liquid phase tube, and add a blind plate to cut off (2) the tank drain port to connect the water source (fire hydrant)
Jiangsu Anjiewen testing and testing projects include safety inspection and evaluation, anti-fall safety device verification, motor testing, wind power, mining, port, lifting and other large brakes, stress and strain testing, metal materials testing, non-destructive testing, graphene, carbon Materials, nanomaterial testing, polymer materials, non-metallic materials testing, water quality, oil quality, scale, corrosion products detection and other unknowns detection, boilers, heat exchange equipment and other integrated water treatment technology services, fuel testing, environmental testing and other projects .
Tank inspection third party
Http://news.chinawj.com.cn