Elevator Cross Flow Fan
Elevator Ventilator
Elevator Ventilator Fan
Elevator Ventilation Fan
Elevator Ventilating Fan
Elevator Ventilation System
Elevator Axial Flow Fan
Elevator Axial Fan
Elevator Aerofoil Fan
OTIS Elevator Ventilating
Fan, Thyssen Elevator Ventilating Fan, KONE Elevator Ventilating
Fan, Giant KONE Elevator Ventilating Fan, ThyssenKrupp Elevator Ventilating Fan,
Schindler Elevator Ventilating Fan, XJ Schindler Elevator Ventilating Fan, Xizi
OTIS Elevator Ventilating Fan, Mitsubishi Elevator Ventilating Fan, Shanghai
Mitsubishi Elevator Ventilating Fan, Fujitec Elevator Ventilating Fan, Hitachi Elevator
Ventilating Fan, Toshiba Elevator Ventilating Fan, Hyundai Elevator Ventilating
Fan, LG Elevator Ventilating Fan, Sigma Elevator Ventilating Fan, Express Elevator
Ventilating Fan, GUANGRI Elevator Ventilating Fan, FUJI Elevator Ventilating
Fan, BLT Elevator Ventilating Fan, CANNY Elevator Ventilating Fan, SJEC Elevator
Ventilating Fan, KOYO Elevator Ventilating Fan, IFE Elevator Ventilating Fan
Elevator Ventilating Fan, Elevator Cross Flow Fan, Elevator Ventilator, Elevator Ventilation Fan, Elevator Axial Flow Fan, Elevator Axial Fan CEP Elevator Products ( China ) Co., Ltd. , https://www.zjelevatortravelingcable.com
Installation requirements 1, camera location requirements
For high-definition network surveillance cameras, the location of the device is directly related to the imaging effect of the device. Therefore, many users regard the monitoring effect as the primary reference for monitoring camera installation locations. However, they have overlooked a very important point: the surveillance camera is not a panacea, and it also has its own requirements for the choice of installation location.
First of all, in the installed position, in order to enable the camera to avoid the interference of the surrounding environment, to achieve a better camera and survival. When installing in the indoor environment, we must ensure that the height of the equipment is not less than 2, 5 meters as much as possible. In the outdoor environment, we also need to place the monitoring equipment at a height of more than 3 meters from the ground. Otherwise, whether it is from the camera self-protection, or equipment monitoring point of view, will have a lot of negative effects. Only after taking into account these most basic issues, the angle is what we consider.
2, camera wiring requirements
For high-definition network cameras, it is obviously more extensive than the traditional analog equipment. However, no matter what kind of transmission method is adopted, interference is one of the problems that we must pay attention to. Especially for wired transmission of video signals, the transmission of signal lines and high-power wires in the same direction is undoubtedly a taboo in the line-up process, and it is even more difficult to place the two in the same transmission line tube for the convenience of construction. Even if it is limited by the environment and it is impossible to separate the two, it is also necessary to ensure a separation distance of at least half a meter. Only such planning can better avoid the influence of strong magnetic interference on video transmission.
For devices using wireless signal transmission, there are fewer restrictions on the line. However, the camera must also avoid the strong magnetic interference sources around it. At the same time ensure that the camera and the ground insulation isolation. In addition, we must also pay attention to avoiding the impact and impediments to the work of the PTZ.
3 , high-performance terminals are indispensable
All along, the limitation of bandwidth is one of the important reasons why network monitoring is difficult to expand. It is precisely because of this factor that the network users have long been divided by two levels - strong use of self-built networks, and the lack of power users either can only tolerate slow transmission, or to find another way out. However, with the continuous improvement of compression technology, as well as the optimization of the network environment. The network monitoring environment is also getting better and better.
However, if you want to achieve better public network users to complete network monitoring, an advanced processing terminal is obviously indispensable. In terms of system performance, we should try our best to adopt the most advanced processing system such as linux or win7, and have advanced CPU, relatively large-capacity memory and graphics cards, etc., in order to allow our equipment to play a more comprehensive imaging effect. .
In addition, if there are other auxiliary alarm facilities in our system, pay attention to their compatibility with the system, pay attention to the stability of the equipment itself in the current environment, and we also need to focus on and debug when setting up the equipment.
4, installation of equipment accessories
In addition to some of the complete aspects mentioned above, some camera installation specifications for auxiliary equipment are also part of our construction that we must not overlook. For example, if the installation positions of the camera heads and racks are to meet the design requirements, the installation should be stable and firm and easy to operate and maintain. The distance between the back and side of the rack from the wall must meet the maintenance requirements; if necessary, we must install a protective cover or temperature control device on the camera. For links with complex lines, we should also indicate the usefulness and characteristics of each line for future maintenance and grooming.
Due to the wide application of high-definition network cameras, people gradually increase the demand for monitoring products, making security monitoring digital, network development direction more clear and clear. High-definition and network In the era of security, video camera products will face more new changes in technology, both to meet the needs of market competition, but also the perfect realization of technology.