Guangzhou Jointair Co., Ltd. , https://www.jointairaccessories.com
Automatic weighing machine is a high-speed, fast dynamic weighing equipment, can be widely used in food, medicine, electronics and other industries, then the automatic weighing machine conveyor belt how to install, want to understand the user of automatic weighing machine, can read below Oh!
First, automatic weighing machine conveyor belt installation:
1. Rotate the adjusting nut to minimize the distance between the driven axis and the master axis;
2, check the direction of the belt, according to the direction of the thick arrow (Figure 1) to set the belt into the tray;
3. Adjust the adjusting nuts on both sides of the tray to make the tension of the belt moderate. Place the belt in the center of the tray.
Second, automatic weighing machine conveyor belt adjustment:
1. Adjust the tension of the belt to a proper degree, put it on the equipment and observe the operation of the leather.
2. If the belt is in the middle of the tray, it is normal and no adjustment is required;
3, if the belt is leaning to the left, can be adjusted as follows:
(1) The belt on the left side can be “tightened†and requires gradual adjustment. Observe while adjusting until the belt returns to the center position. If you find that the adjusting nut is tight, do not force adjustment.
(2) The belt on the right can be “tuned†and requires progressive adjustment. Observe while adjusting until the belt returns to the center position.
(3) If it is relatively large, adjust it slowly and it is difficult to come back, you can quickly loosen the right belt. If the belt has been rubbed against the side panel, it should be stopped immediately.
The above content is provided by Shanghai Henggang Instrument and Meter Co., Ltd. Thank you for your support. If there are any difficulties related to the automatic weighing machine, please contact us at any time!
Related Recommendations: Small Weighing Machine, Online Reject Machine, Food Checkweigher, Capsule Sorter, Automatic Sorter