waterproof COB spotlight; IP65 led SPOTLIGHT; SPOTLIGHT; LIGHTSPOT; wall wash spot;ceiling spotlight HSONG LIGHTING CO,. LTD , https://www.lightingforproject.com
According to the application and specialties, precision alloys are split into hard magnetic alloy, magnetically soft alloy, elastic alloy, expansion alloy, thermo bimetal, resistance alloy, thermocouple alloy, electric conduction alloy, electric contact alloy, shape memory alloy, superconducting alloy and so on.
1. Description
Â
Inconel 625
Â
UNS
Trademark
JIS
W.Nr
N06625
Inconel625
NCF625
2.4856
Â
Â
Inconel 625 Chemical composition
Â
Alloy
%
Ni
Cr
Mo
Nb
Fe
Al
Ti
C
Mn
Si
Cu
P
S
625
Min.
balance
20
8
3.15
Â
Â
Â
Â
Â
Â
Â
Â
Â
Max.
23
10
4.15
5
0.4
0.4
0.1
0.5
0.5
0.5
0.015
0.015
Â
Inconel 625 Pysical properties
Â
Density
8.4 g/cm³
Melting point
1290-1350ºC
Â
Inconel 625 Alloy m inimum mechanical properties in the room temperature
Â
Alloy status
Tensile strength
Rm  N/mm²
Yield strength
RP0.2 N/mm²
Elongation
A5 %
Brinell hardness
HB
Solution treatment
760
345
30
≤220
Â
Â
Characteristic as below:
1. Excellent corrosion resistance of different kinds of media in both oxidation and reduction environments.
2. Excellent resistance of pitting and crevice corrosion, and won't happen stress corrosion cracking because of chloride.
3.Excellent resistance of the inorganic acid corrosion performance, such as nitric acid, phosphoric acid, sulfuric acid, hydrochloric acid and the mixture of sulfuric acid and hydrochloric acid.
4. Excellent corrosion resistance of different kinds of inorganic acid mixture performance.
5. Good corrosion resistance of a variety of concentrations of hydrochloric acid when the temperature up to 40ºC .
6. Good machining and welding, no weld cracking sensitivity.
7. Have pressure vessel authentication for the wall temperature between -196 ~ 450ºC .
8. Apply for the highest standard lever VII of acidic environment by the NACEÂ (Â MR-01-75)authorized.
Inconel 625 Metallurgical structure
625 is face-centered cubic lattice structure. Dissolve out the carbon granule and instability quaternary phase, then change it to stability Ni3 (Nb,Ti) trimetric lattice around 650ºC after a long time heat preservation. nickel-chromium content will strength the mechanical performance in the state solution while suppress the plasticity.
Inconel 625 Corrosion resistance
625 own a very good corrosion resistance in many media, especially with excellent resistance to pitting, crevice corrosion, intercrystalline corrosion, and erode in oxide, also good resistance to inorganic acid corrosion, such as nitric acid, phosphoric acid, sulfuric acid and hydrochloric acid. 625 can resist the alkali and organic acid corrosion in the oxidation and reduction environment. Effect resists the chloride reduction stress corrosion cracking. Normally no corrosion in the sea-water and industry environments since high corrosion resistance to the sea-water and salting liquid,as well as in high temperature, without sensitivity during welding. 625 have the resistance to oxidation and carbonizing in the static and cycle environments, also hacve the resistance the chlorine corrosion.
Â
Inconel 625 Application field :
Soften annealing low carbon alloy 625 widely used in the chemical process industry, good corrosion resistance and high strength made it an good choice for structural parts. 625 have application in sea-water for local mechanical stress attach.
Inconel 625 Typical application field as below:
1 .The Organic chemical process parts contains chloride, especially in the use of acid chloride catalyst.
2. The digester and bleacherin the use of paper pulp and paper making industry.
3.Absorption tower, re-heater,gas import board, fan, blender, fair water fin, flue and so on for using in flue gas desulfurization system.
4. The equipment and parts in the use of acidic gas environments.
5. Acetic acid and anhydride reaction generatorÂ
6. Sulfur acid cooling
Company Profile:
Test Equipment :
Company strength:
Certificate:
 
Welcome to contact us,thanks
Our products sales all over the world as well. From the following two websites you can also get more information about our company:
http://www.jsxdhj.cn/
http://xingda-alloy.en.made-in-china.com
Â
Welcome to contact us,thanks
Â
Model NO.: Xingda-025
Colaor: Silver
Shape: Irregular
Tensile Strength: 980min
Trademark: Xingda
Transport Package: Wooden
Specification: 1/2 to 5 Inch
Origin: Jiangsu
HS Code: 7409900000
Precision Alloys have special physical and mechanical properties, and are extensively applied in the key elements and devices of precision motor, electric appliance, instruments and meters, telecommunication equipments, and precision machines.