The Electric Reciprocating Saw is used to cut tree and metal tube, with cutting capacity: 115mm for wood and 8mm for soft steel.
The Reciprocating Saw Saber Saw is also can be used to cut meat with Stainless Steel Blade.
The Reciprocating Saw Vibration is small when cutting the wood, work with 0-2700 rpm speed, 30mm stroke length.
The Tree Cutting Power Tool with a aluminum gear box, not plastic one, for better product performance.
The Electric Reciprocating Saw with Quick Release Chuck, for easy blade change.
Reciprocating Saw Sabre Saw,Reciprocating Saw,Cordless Reciprocating Saw,Sabre Saw Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com
The rubber spray material chamber is undoubtedly the most important in the sprayer accessories. The rubber spray material chamber is very widely used, not only in the traditional coal mines and engineering construction, but also in the construction of culverts, the construction of subways, and the construction of hydropower projects. Wide range of applications. The accessories of this sprayer are very distinctive.
Because the rubber spray material cavity is widely used in applications, it is also very characteristic in design. The rubber spray material chamber is not only applied to the spraying machine, but also applied to the inner lining of various industrial furnaces. It is applied with refractory materials and pressure resistant materials, and has very good fire resistance and pressure resistance, especially in pressure resistance. There is a good performance on this, and this performance is also related to the use of the sprayer under a variety of complex conditions.
The sprayer friction plate is also a very important accessory in the curing process of the spraying machine. It is the main component of the mortar used to grind sand, and it can be said to be the heart of the spraying machine. Because the cardboard sand is relatively easy to wear during grinding, it is easy to grind out a lot of groove back on the surface and cause the overall surface to be too rough, so that the wind pressure is reduced and the work cannot be normally performed, and even the slurry cannot be sprayed. In this case, it is necessary to replace the lining of the steel plate, so the cost is relatively high, so now more use of the mortar friction plate instead, can obtain greater economic benefits, making the machine wear slow, promote the machine Longer life.
In addition to these two more commonly used accessories, accessories such as taper sleeves, swirlers, etc. are also very important in the curing process of the spraying machine. The role of rubber elbows and cyclone fittings for the spraying machine is also very obvious. When curing the spraying machine, it focuses on the combination of reality, and more closely combines with the actual situation, raising the maintenance of the spraying machine to a higher level. s level.
For a spraying machine, performance is the most important, followed by accessories. Only with a certain understanding of the sprayer accessories, can we be more confident and more targeted in the operation and maintenance of the spray gun.