In accordance with the material division, at present, the furniture sold on the market is mainly divided into solid wood furniture and plate furniture, this classification seems simple, but the furniture placed in the store are all finished products, which are solid wood which is the plate, It is difficult to distinguish between appearance and ordinary consumers. Only by acquiring certain purchasing skills can they avoid buying shoddy, fancy furniture. Solid wood furniture refers to furniture made of natural wood. The surface of the furniture can generally be seen in the texture of the wood. At present, there are roughly two types of solid wood furniture on the market. One is pure solid wood furniture. All the materials used in such furniture are solid wood. The other is solid wood furniture, which is the natural texture, feel and color of wood. It is the same as solid wood furniture, but it is actually a combination of solid wood and wood-based panels. Advantages: The material is natural and has no chemical pollution, which is in line with modern people's psychological needs of advocating nature. Disadvantages: easy to deform, the finished product can not be disassembled, and it is inconvenient to carry. Buy points to see wood grain and knot knot Due to different materials, in the home store, the price of the same table, solid wood furniture and plate furniture differ by more than a thousand yuan. It is understood that the special material of solid wood forms a natural color difference, knots and textures. When you purchase it, you can clearly identify the solid wood and the plate by looking carefully at the introduction of the merchant. Selected materials: Nowadays, the types of trees used in solid wood furniture sold on the Suzhou market are elm, teak, maple, beech, oak, ash, birch, beech, poplar, beech, pine, etc. Among them, eucalyptus, eucalyptus, and ash are the most valuable, and the corresponding prices are higher. Look at patterns and knots: Solid wood furniture has a natural wood texture, a good solid wood board, you see a pattern from the front, opened the door, the corresponding position can see the corresponding pattern. In the same way, solid wood panels generally have a frontal position where the knots are knotted, and there should also be knots on the other side. Buying skills three see two touch a pressure Due to the need of environmental protection, most solid wood furniture are manufactured using a combination of solid wood and wood-based panels. This process maintains a pure natural environment while avoiding cracks and warping caused by the use of large areas of solid wood. The beautiful texture of the log, without losing the elegant and elegant nature of solid wood furniture. It is understood that due to the different processing technology, the purchase of such solid wood must be "three see two touch a pressure." "Three look": First of all, look at the material. Generally good solid wood furniture, open the doors, drawers, the wood dry, white, texture, texture, close, delicate. At the same time, good solid wood furniture cannot have any irritating odor. Look at the components again. When purchasing solid wood furniture, carefully look at the parts of the furniture, such as the sofa legs, columns, and load-bearing bars that connect the columns near the ground, to ensure that there are no large knots or cracks or cracks; view the sliding and positioning of the drawers, Open all the cabinet doors and drawers, and see if the screws at the joints of the components are fastened; whether the internal wood-based panels have been sealed or not, and many accessories are installed without missing nails or nails. Finally, it depends on the place of production. If the moisture content of solid wood furniture is higher than 1% of the average moisture content in the area of ​​use, cracking, deformation, loose racks, and warpage may occur. Therefore, it is best to purchase furniture manufactured by a well-known brand company. "Two touches": It is whether the surface is smooth or not. The surface of the solid wood furniture is flat and there are no problems such as protrusions. Touching the edges and corners of the furniture, such as roughness, indicates that the process is relatively poor. "A pressure": When picking solid wood furniture, it is necessary to lightly press the various stress points of the furniture, such as column foot or shelf support, etc., and test whether or not it is stable. >>> When the country meets IKEA Happy house slave sun 55 flat small apartment decoration Furniture purchase plate entrance decoration furniture wood furniture home IKEA door price plate furniture drawer cabinet door home accessories decoration home Copper Tube,Refrigeration Copper Tube,Air Conditioning Radiator,Copper Tube Fittings Suzhou Green New Material Technology Co., Ltd. , https://www.glooptube.com
Meihao Home Accessories Museum      Sfino Custom Panel Furniture Â