1. Explosion-proof lighting explosion-proof categories, levels and temperature groups see national standards.

2. According to the explosion-proof type, it can be divided into 5 types: explosion-proof, increased safety, positive pressure, non-sparking and dust explosion-proof. It can also be combined by other explosion-proof types and the above-mentioned various explosion-proof types or composite type and special type. .

3. According to the type of protection against electric shock can be divided into I, II, III category. The protection against electric shock is to prevent the explosion-proof lamp housing from being easily touched and the parts are electrified, so that the human body is exposed to electric shock or conductors with different potentials to generate electric sparks and ignite the explosive mixture.

AI class—On the basis of basic insulation, accessible conductive parts that are not energized during normal operation are connected to the protective ground conductor in the fixed line.

Class BII - Use double insulation or reinforced insulation as a safety measure without grounding protection.

Class CIII - Use a safe voltage with an effective value of not more than 50V, and no voltage above it will be generated.

Category D0 - only rely on basic insulation as a safety protection measure. The vast majority of explosion-proof lamps are protected against electric shock by type I and category lamps, and only a few are Type II and Type III lamps. For example: all plastic explosion-proof lamps, explosion-proof flashlight Jane.

4. Classified according to the protection class of the enclosure: In order to protect the dust, solid foreign matter and water from entering the lamp cavity and touching or accumulating on the live parts to cause flashover, short circuit or damage to the electrical insulation, there are a variety of enclosure protection methods to protect the electrical Insulation effect. The characteristic letter “IP” followed by two digits is used to characterize its enclosure protection level. The first number indicates the protection against humans, solid objects or dust. Divided into 0-6 levels. Explosion-proof lamps are sealed lamps. Their dust-proof capacity is at least 4 levels. The second number represents the protection against water and is divided into 0-8 grades.

5. According to the lighting design of the supporting surface material classification: indoor explosion-proof lighting may be installed on many ordinary surface of combustible materials, such as wooden walls and ceilings, they do not allow explosion-proof lighting installation surface temperature exceeds the safety value. According to whether explosion-proof lamps can be installed directly on the surface of ordinary combustible materials, they can be classified into two categories. One category is lamps that are only suitable for installation on non-flammable surfaces. The other category is lamps that are suitable for direct installation on the surface of ordinary combustible materials and are marked with symbols.

6. According to the use of the installation can be divided into fixed, portable, portable.

Threaded Flange

Standard:
ANSI B16.5,
EN1092-1 DIN2565 DIN 2566

Size: 1/2''~60''
Class Rating: 150~2500
Facing: RF(raised face);FF(flat face);RTJ(ring type joint);RJ(ring joint face)
TG(tongue and groove face);MFM(male and female face)
Manufacturing process: forge,
Material:
Carbon steel:
ASTM A105;
ASTM A266 GR.1,GR.2,GR.3,GR.4
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;

Alloy steel:
ASTM A694 F42/F46/F48/F50/F52/F56/F60/F65/F70;
ASTM A182 F5a/F5/F9/F11/F12/F22/F91;
ASTM A350 LF1/LF2/LF3;
Duplex steel:
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835

Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800



Threaded flange is a flange that connects threads to pipes. When it is designed, it can be treated by a loose flange. The advantage is that there is no need for welding, and the additional torque on the cylinder or pipe when the flange is deformed is very small. The disadvantage is that the thickness of the flange is large and the cost is high. It is suitable for the connection of high pressure pipe.

The threaded flange is made from the inner hole of the flange into pipe thread and connected with the pipe with thread, which is a non welded flange. Compared with the flat welding flange or butt welding flange, the threaded flange has the characteristics of convenient installation and maintenance, and can be used on some pipelines which are not allowed to be welded on the spot. Alloy steel flanges are of sufficient strength, but they are not easy to weld or have poor weldability. Threaded flanges can also be selected. However, if the temperature changes rapidly or the temperature is higher than 260 C below -45 C, it is recommended not to use threaded flange to avoid leakage.

Threaded Flange,Din Thread Flange,Astm Threaded Flange,En1092-1 Thread Flange

HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com

Posted on