The LED emergency driver for panel can be customized from 3W-100W with half power emergency output for emergency lighting 60-300mins. Automatic lighting up when main power failures. Suitable for LED fitting with external led driver. With internal or external lithium battery back up. Widely using for office, building, warehouse, school, hospital, workshop etc. Emergency Led Driver,Emergency Backup Driver for led,Emergency Light Driver,Emergency Driver For Panel,led light emergency power supply Foshan Nai An Lighting Electric Co.,ltd , https://www.articalight.com
Features:
Styles 10, 15, 20, 30, 40, 50, & 70
Consists of a mounting plate and closure for finished appearance in ceilings or soffits
Intended for use in areas with finished
ceilings or walls, and the adjustment provided by these escutcheons reduces the accuracy to which fixed piping to the sprinklers must be cut, while providing a decorative recessed sprinkler installation
Primarily designed for use with standard spray, quick response sprinklers and the Designer residential sidewall sprinklers
Maximum 1/2" to 3/4" adjustment
Used to improve the overall appearance of the sprinkler installation by concealing the clearance holes required for wall or ceiling installation
Deep, two-piece, adjustable
Available for 1/2" and 3/4" NPT
Used to improve the overall appearance of the sprinkler installation by concealing the clearance holes required for wall or ceiling installation
Deep, two-piece, adjustable
3/4" total adjustment
Designed for use with specific types of Series TY-B, TY-FRB, TY-L, and TY-FRL Sprinklers that may be located in areas that make them susceptible to mechanical or physical damage
Rugged guard design to minimize possible damage to sprinklers
Shields are for use in storage racks or beneath grated mezzanine, or other areas requiring the sprinklers to be shielded from possible discharge from sprinklers above
Can be used with either 1/2" or 3/4" NPT sprinklers
 GUMC/GUWSU Sprinkler Guards are designed for use as accessories for sprinklers located in areas that make them susceptible to mechanical or physical damage.
Installation of Guards on Sprinklers form Intermediate Level Sprinkler assemblies intended for use in fire sprinkler systems.
The Model GUMC/GUWSU Sprinkler Guards are compatible with specific types of Series TY-B and TY-FRB sprinklers.
Designed for use with Model ESFR-25 pendent sprinklers that may be located in areas that make them susceptible to mechanical or physical damage
First Listed sprinkler guard designed to help meet protection guidelines for the use of in-rack sprinklers .
Â