Anti-static plastic turnover basket is necessary for the production, turnover, storage and packaging of electronic and electrical components and equipment manufacturers. It is an indispensable instrument to effectively protect static electricity from electrostatic damage. With the wide application of static sensitive devices, the anti-static turnover box has received great attention from users. Since the introduction of some anti-static turnover devices in China in the 1980s, China has gradually formed a pattern of independent research, development and production, which basically meets the production capacity of series of anti-static turnover boxes for domestic production. In recent years, the Anti-static Product Quality Supervision and Inspection Center of the Ministry of Information Industry has conducted hundreds of inspections on anti-static turnover boxes, accumulated a large amount of data and data, and provided relevant specifications and testing methods at home and abroad, laying down standards for the development of standards. Good foundation. During the preparation process, the preparation team conducted extensive investigation and research, summarized the practical experience of manufacturers and users, and studied the relevant provisions of relevant national standards and industry standards to coordinate them. The specification gives a more detailed test method for the technical parameters of the product, which is consistent with the test method in the relevant standards, and makes the general specification complete and operative. The specification is based on GJB/Z105-98 (Appendix H) for three areas of ESD protection material according to conductivity. At the same time, it also refers to the electrostatic shielding performance data of conductive containers in the United States 3M company. Their research results show that a conductive container has a volume resistance of less than 500 Ω-cm. If an external 5000V electrostatic voltage is close to the container, the measured voltage in the container is close to 0V. . In this specification, the shielding volume resistivity is specified to be less than 100 Ω-cm. The specification proposes that the uniformity of the same container material resistance is proposed by reference to GJB/105-98 (Appendix H) charge bleed requirements. Conductivity is an important property of ESD protection materials, allowing charge to be discharged to the ground. The uniform nature of the resistivity on a container allows the charge to be evenly distributed throughout the material. The time measurement of the electrostatic full-life is performed with reference to GJB/Z 105-98 H3.2.4. The electrostatic decay performance test presents complex measurement problems for uniform materials (within the range of volume surface conductivity); non-uniform volume and surface two conductive material systems present extremely complex measurement problems. For materials of composite structures, the dependence of the resistivity (volume resistivity or surface resistivity) of the material on the decay time of the static electricity may be inconsistent, in order to make the static electricity specified to be less than 10 seconds and 2 seconds, respectively. The test specifies that the test temperature for heat resistance is 80 ° C, which is higher than the 60 ° C specified by the national standard. In the specification, the physical and mechanical properties of the impact strength, due to the diversity of the turnover box structure of the electronics industry, the drop test can be used for the one-time injection molding turnover box and component box, but it is difficult to implement the overall drop test for the assembled and formed turnover frame and the car. For this purpose, it is tentatively designed to make a notched impact test on plastic parts to ensure the reliability of the turnover box. This specification does not include anti-static plastic turnover baskets made of ordinary plastic (insulating plastic materials) coated with antistatic materials and materials other than those specified in this specification. But you can refer to the implementation.
Ultra Plantâ„¢ Grow Light offers One Chip Technology aimed to meet your indoor growing expectation such as improve plants' quality, increase yield, or better the margin, etc., all for helping you realize a higher return on your crops.
From Ultra Plantâ„¢ APP, you are able to schedule the growing process including photoperiod, brightness and spectral in advance. The lighting system will help you grow smarter, easier and better.
Far Red Grow Light,Far Red Led Grow Light,Far Red Light Plants,Far Red Led Grow Lights Feton Corporation , https://www.ultraplantgrowlights.com
Ultra Plantâ„¢ Grow Light is combined our advanced All-In-One technology with patented optical design and customized light full spectrum supported from our experienced LED engineers, plant specialists and other partners working on horticulture.
Ultra Plantâ„¢ is the most versatile horticultural grow lighting fixture for indoor plants with flexible full spectrum, brightness control and uniform, wider light distribution, suitable for top lighting of all types of crops. No matter it applies to anywhere for any crop, Ultra Plantâ„¢ can do perfect work for you.