A magnetic door stop is a set of two pieces of hardware. One piece attaches to the bottom inside corner of a door, while the other piece is fixed to the adjacent wall. When these two pieces come in contact, the magnetic door stop may then be able to hold a door open and protect the wall from damage at the same time. Door stops are often available in a variety of finishes, styles and price ranges to suit an individual`s specific needs.
Once both pieces of hardware have been successfully installed, the two pieces should [catch" when the door is open. This is because the two magnets have opposite, attractive forces strong enough to hold a door open. A magnetic door stop is, however, usually weak enough that a simple tug on the door should separate the magnets, which allows the door to close when necessary.
Magnetic Door Stop Lowes,Flush Magnetic Door Stopper,Magnetic Door Stopper Price,Black Magnetic Door Stop Leader Hardware Manufacturer Limited , https://www.leaderhardwarecn.com
Figure 1 is a cover type component. There are three uniformly distributed elliptical holes in the side wall, which require high position and shape accuracy. According to the process characteristics of the part, the traditional process steps are as follows: first, pre-draw forming, then shaping, and finally drilling by the fitter. During the implementation of the process, it is difficult to ensure the accuracy of the shape of the three elliptical holes of the sidewall when the fitter drills, and the efficiency is low.