Intergrated Led Emergency Modules The Intergrated Led Emergency Modules is match the compact LED fittings to improve the emergency function. Normally it is workable for small wattage from 3-60W LED panels, downlights, led tubes, tri-proof ceilings. Full power output or half power emergency output is optional. Customized emergency lighting time is available. Automatic lighting up when main power failures. Widely using for home, parking lot, office, building, warehouse, school, hospital, workshop etc. Emergency Light Module,Emergency Led Flasher Module,Led Emergency Modules,Intergrated Led,led light with emergency battery Foshan Nai An Lighting Electric Co.,ltd , https://www.naipsled.com
1.Virgin or recycled low density polyethylene (LDPE)
2.Grade:LDPE Film/blowing moulding/injection/Extrusion/pipe grade
Â
3. Application:Â LDPE Low Density Polyethylene:
LDPE(low density polyethylene) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc...LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc...They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams.
4. Specification :
LDPE:
Physical Properties
Test Method
Nominal Value
Unit
Density
ISOÂ 1183
0.921
g/cm3
Melt Mass-Flow Rate (MFR)
ISOÂ 1133
1.9
g/10min
Hardness
Â
Â
Â
Shore Hardness (shore D)
ISOÂ 868
45
Â
Mechanical Properties
Â
Â
Â
Tensile Modulus
ISOÂ 527-2
175
MPa
Tensile Strength
Yield,Â
ISOÂ 527-2
9.0
MPa
Break,
13.0
MPa
Tensile Strain(Break)
ISOÂ 527-2
850
%
Modulus of Elasticity
Internal Method
250
MPa
Thermal
Â
Â
Â
Vicat Softening Temperature
ISOÂ 306/A50
89.0
°C
Melting Temperature (DSC)
DINÂ 53765
108
°C
Peak Crystallization Temperature (DSC)
DINÂ 53765
97.0
°C
Heat of Fusion
DINÂ 53765
110
J/g
Electrical
Â
Â
Â
Volume Resistivity
ASTMÂ D257
8.5E+15
ohm •cm
Dielectric Strength
ASTMÂ D149
30.0
kV/mm
Dielectric Constant (60Hz)
ASTMÂ D150
2.20
%
Dissipation Factor (60 Hz)
ASTMÂ D150
0.00050
Â
Â
1.Virgin or recycled low density polyethylene (LDPE)
2.Grade:LDPE Film/blowing moulding/injection/Extrusion/pipe grade
Â
3. Application:Â LDPE Low Density Polyethylene:
LDPE(low density polyethylene) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc...LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc...They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams.
4. Specification :
LDPE:
Physical Properties
Test Method
Nominal Value
Unit
Density
ISOÂ 1183
0.921
g/cm3
Melt Mass-Flow Rate (MFR)
ISOÂ 1133
1.9
g/10min
Hardness
Â
Â
Â
Shore Hardness (shore D)
ISOÂ 868
45
Â
Mechanical Properties
Â
Â
Â
Tensile Modulus
ISOÂ 527-2
175
MPa
Tensile Strength
Yield,Â
ISOÂ 527-2
9.0
MPa
Break,
13.0
MPa
Tensile Strain(Break)
ISOÂ 527-2
850
%
Modulus of Elasticity
Internal Method
250
MPa
Thermal
Â
Â
Â
Vicat Softening Temperature
ISOÂ 306/A50
89.0
°C
Melting Temperature (DSC)
DINÂ 53765
108
°C
Peak Crystallization Temperature (DSC)
DINÂ 53765
97.0
°C
Heat of Fusion
DINÂ 53765
110
J/g
Electrical
Â
Â
Â
Volume Resistivity
ASTMÂ D257
8.5E+15
ohm •cm
Dielectric Strength
ASTMÂ D149
30.0
kV/mm
Dielectric Constant (60Hz)
ASTMÂ D150
2.20
%
Dissipation Factor (60 Hz)
ASTMÂ D150
0.00050
Â
Â
Model NO.: LDPE
Colour: Natural
Certificate: ISO
Application: Film Grade,Extrusion Grade,Injection Grade
HS Code: 3901100090, 3901100090
Trademark: leveling
Transport Package: 25kg/Bag
Specification: LDPE
Origin: China
Model NO.: LDPE
Colour: Natural
Certificate: ISO
Application: Film Grade,Extrusion Grade,Injection Grade
HS Code: 3901100090, 3901100090
Trademark: leveling
Transport Package: 25kg/Bag
Specification: LDPE
Origin: China