Tiles in the bathroom space wall must be filled. Tiles can resist the erosion of moisture, protect the waterproof layer of the walls, and at the same time, they are easy to maintain clean and beautiful for a long time. Households using ceilings should note that the part covered by the ceiling should also be covered with tiles in order to protect the entire wall. The wall of the bathroom is suitable for paving matt tiles, which can make people feel warm and do not puncture the eyes; floor tiles should use non-slip texture. General matt or shallow convex floor tiles, suitable for wet and slippery ground after bath. Consider the slope: The bathroom floor should be 10-20 mm below the floor of other rooms. When laying tiles, pay attention to the flatness of the tiles, because the flatness and slope of the bathroom tiles will affect the flow of water on the bathroom floor, but also consider the location and size of the floor drain. Usually, the laying of bricks retains a slope of 1% water leakage, and the floor drain is the lowest for drainage. Tile seams should be the same thickness, but also with the seams of the wall tiles. Wet and dry divisions: "Dry and wet divisions" is a popular foreign design concept, namely the separation of shower areas from toilets and basins. Dry and wet areas can be distinguished by different tile materials and color varieties, so that the two do not interfere with each other and avoid the need to wipe out the tiles after the bath. Building Materials Knowledge Space Room Home Kitchen Wall Tiles Kitchen Toilet Ceiling Bathroom Tiles Bathroom Doors Bathroom Wall Tiles Bathroom Door Size Bathroom Size Bathroom Ceilings Toilet Design Toilet Waterproof Bathroom Floor Tiles Bathroom Leakage Kitchen Tiles 1.cylindrical milling cutter End Mill,Roughing End Mill,Carbide Square Drill Bit,Coating Machine Tools Behappy Crafts (suzhou)Co.,Ltd , https://www.craftsbehappy.com
Taoxiu Ceramics Jinyi Ceramics Qianghui Tiles
Links: Building Materials Selection Guide: How to Choose Sliding Door Hardware
Be careful home crisis kitchen bathroom is the focus
Used for processing flat surfaces on horizontal milling machines. Cutter teeth are distributed on the circumference of the milling cutter, and are divided into straight teeth and spiral teeth according to tooth shape. According to the number of teeth and coarse teeth and two kinds of fine teeth. The helical tooth rough tooth milling cutter has fewer teeth, high tooth strength and large chip space, which is suitable for rough machining. Fine-tooth milling cutters are suitable for finishing.
2. face milling cutter
Also known as disc milling cutter, used for vertical milling machine, end milling machine or gantry milling machine processing plane, end face and circumference have cutter teeth, also have coarse teeth and fine teeth. The structure has three kinds: integral type, insert type and transferable type.
3. End milling cutter
Used for processing grooves and step surface, knife teeth in the circumference and end face, can not work along the axial feed. When the end mill has end teeth through the center, axial feed can be provided.
4. Three-side edge milling cutter
Used for processing all kinds of grooves and steps, its two sides and circumference are provided with cutter teeth.
5. Angle milling cutter
For milling grooves at a certain Angle, there are two kinds of single Angle and double Angle milling cutters.
6.Saw Blade milling cutter
Used for machining deep grooves and cutting off workpieces, there are more cutter teeth on the circumference. In order to reduce the friction during milling, there are 15 '~1° auxiliary Angle on both sides of the cutter teeth. In addition, there are keyway milling cutters, dovetail slot milling cutters, T - shaped slot milling cutters and various forms of milling cutters.