A low speed centrifuge is a laboratory instrument that spins samples at a relatively low speed, typically between 1,000 and 10,000 rpm (revolutions per minute). This type of centrifuge is used for separating particles or components of a solution based on their size, density, or sedimentation rate. Low speed centrifuges are commonly used in medical and biological research, as well as in industrial applications such as the separation of oil and water. They are also used in clinical settings for the separation of blood components, such as red blood cells and plasma. Some common features of low speed centrifuges include a timer, temperature control, and various rotor options to accommodate different sample types and volumes. Low Speed Centrifuge,Plastic Desktop Centrifuge,Lab Centrifuge Machine,Centrifugate Oil Separator Lachoi Scientific Instrument (Shaoxing) Co., Ltd. , https://www.lachoinst.com
The material of 20# seamless steel tube is: High-quality carbon structural steel Grade: 20 Steel Standard: GB8162-2008 (structure tube) GB/T8163-2008 (fluid tube) GB3087-2008 (low and medium pressure boiler tube) GB5310-2008 ( High pressure boiler tube
The strength is slightly higher than that of No. 15 steel, rarely quenched, and has no temper brittleness. Cold deformation high plasticity, general for bending, rolling, crimping and hammer arch processing, arc welding and contact welding welding performance, gas welding thickness is small, strict shape or complex shape of the parts are prone to cracking. Machinability Cold drawing or normalizing is better than annealing. It is generally used for manufacturing with low stress and high toughness requirements.
20 # seamless steel pipe material is 20 # steel, the strength is slightly higher than the 15th steel, rarely quenching, no temper brittleness. Cold deformation high plasticity, general for bending, rolling, crimping and hammer arch processing, arc welding and contact welding welding performance, gas welding thickness is small, strict shape or complex shape of the parts are prone to cracking. Machinability Cold drawing or normalizing is better than annealing. It is generally used for manufacturing with low stress and high toughness requirements.