adhesive There are two choices for the adhesive wall type of ceramic wall tiles. One is to directly paste the finished adhesive to the market, and the other is on-site. There are three kinds of adhesives commonly used in the market for sticky bricks: the first one is a quick-acting adhesive, which is a direct-use product. When using, apply a layer of glue on the surface of the wall and the back of the tile. After a few minutes of drying, touch the rubber surface without touching the hand. The upper wall can be pressed and pressed, which is very convenient to use. The second type is JD-503 tile adhesive. The product is white powder. When used, it is added with water to make a viscous glue. This kind of product not only has a strong adsorption force, but also has a certain time to make the paste adjustment, and the adjusted glue should be used up within 4 hours. Generally, the thickness of the glue is between 3 and 5 mm. The third type is 903 multi-purpose construction glue, which is also a direct use product. This product has high bonding strength and can be adjusted within 2 hours. The thickness of the squeegee is 2 mm, which is very convenient to use. The selection of the finished glue is used, and the cost is high. It is suitable to be used when the surface of the base layer of the wall is often flat, otherwise the cost of the paste will increase. In the home decoration, the wall brick is generally used to prepare 107 cement cement citrus on site. The cement paste is prepared by the volume ratio of cement 2107 glue 2 water=100210220, and the bonding thickness is less than 5 mm. It can be adjusted for several hours, and the surface requirement of the wall is low, which is the most economical and practical adhesive. LED ceiling light transform ambient lighting into an exquisite balance of refined appearance and superior efficiency.When illuminated, the luminous led ceiling light for ceiling deliver exceptional uniform light to the space and while off they appear completely free of a visible light source. Luminous ceiling light without false ceiling can be used in versatile application ranges including entrance halls, receptions, stairwells, corridors, circulation routes, rest areas of buildings. Usually , the voltage of led fixture is AC120-347V in N-America , and 85-265V in other areas.
Meet CE ,ETL ,BIS, ENERY STAR certificate.
Led Ceiling Light,Thin Led Ceiling Light,Luminous Ceiling Light,Luminous Led Ceiling Light WOSEN LIGHTING TECHNOLOGY LIMITED , https://www.wosenled.com
Power range include 40W, 48W, 60W.
Have 100lm/w; 110lm/w; and over 120lm/w for different power option.
Rated IP20 for indoor locations, IK03 for anti-impact.
Rated 30,000 hours L70 lifetime.