Veneer panels are widely used in everyday homes, with fresh textures and natural colors. Atmospheric furniture is inseparable from the decorative panel. At present, the production of furniture, wall skirts or decorative doors, package doors, door sides, ceilings, etc. generally use a large core board, multi-layer plywood, particleboard or medium density fiberboard to produce the basic frame structure, and then choose a variety of tree stickers according to personal preferences The surface of the decorative plate is attached to the surface of the frame, and then painted on the surface thereof, such as polishing, painting, etc., so that the appearance effect of the solid wood furniture can be achieved, and the cost is far lower than that of the solid wood. 1, see identity Natural veneer: The texture is natural and environmentally friendly. At present, the veneer on the market is mainly divided into natural wood veneer and artificial veneer. The natural wood veneer is a thin wood piece made from wood by slicing or peeling. The commonly used tree species are ash, oak, oak, oak, oak, yellow pineapple and so on. Its size is 2440 mm long, 1220 mm wide and 3 mm thick. Because it is a natural tree species processed, its texture is beautiful and natural, with excellent decorative effect. Artificial veneer: If the fire board is composed of three layers: surface paper, colored paper and base paper (multi-layer kraft paper). The surface paper and colored paper are impregnated with a melamine resin component, so that it has good impact resistance, flexibility, wear resistance and scratch resistance. Since the artificial board is covered with decorative paper, the color and texture are richer and more varied than natural decorative panels, and the price is relatively low. 2, do the test Knowing the difference and performance of the two, we must carefully compare and select the next. How to choose? Experts tell us: 1. When purchasing, pay attention to the manufacturer's name, site, and trademark. If only the plate with complete identification can obtain the necessary quality assurance. 2, no obvious flaws on the surface. The surface of the plate should be smooth, without burr groove marks and planer marks, no glue penetration phenomenon, no yellowing, blackening and other contamination on the board surface. 3, distinguish between artificial and natural veneer. Usually, the texture pattern of artificial veneers has rules, and the natural veneers are natural wooden patterns. The texture patterns are naturally irregular and the variation is large. 4, no open plastic phenomenon. The glue and strength fully reflect the advantages and disadvantages of the gluing performance of the sheet. The higher the gluing strength, the better the gluing performance. When choosing the plate, we should pay attention to the structure of the decorative plate glue layer is stable, there is no open glue phenomenon, carefully observe whether there is bulging, delamination phenomenon between the veneer and the substrate. 5, the smell should be light. The adhesive used for the decorative panel is mainly urea-formaldehyde resin. After the decorative sheet is processed and treated, a small amount of formaldehyde will remain in the material. This odor is extremely harmful to the human body. The greater the odor, the higher the amount of formaldehyde released and the more polluting. 6. Observe the texture structure. The material texture should be detailed and uniform, with clear color and beautiful wood grain. Substrate and parquet texture should be arranged according to a certain rule, and the wood color is similar, no obvious color, patchwork and the edge of the board is almost parallel, this kind of plate can receive a very good decorative effect. Plates to buy building materials caterpillar plate decoration furniture formaldehyde door prices home Wall Luminaires,Outdoor Sconces,Wall Sconce,Wall Lamp Light Ningbo Royalux Lighting Co., Ltd. , https://www.royaluxled.com
