Single layer glass reactor is also called single wall glass reantor, non-jacket glass reactor. Comparing double layer jacket glas reactor, there is no jacket for heating or cooling circulation. The heating bath or heating mantle under the single layer glass reaction kettle is used for heating.
Stainless steel heating elements have been built into bath of single layer glass reactor for heating
You don't need more expensive heater circulator. You can do high temperature or nature temperature chemical mixing reaction for with this single layer glass reactor.
You can buy 1l 2l 3l 5l 10l 20l 30l 50l 100l 150l 200l single layer glass reactor from kori instrument factory. Exproof glass reactor is opyional for the glass reactor above 10l.
Support OEM & ODM and flexible custom service.
Chemical single layer glass reactor 1l 2l 3l 5l 10l 20l 30l 50l 100l 150l 200l with stainless steel water oi bath
Chemical single layer glass reactor 1l 2l 3l 5l 10l 20l 30l 50l with heating mantle for heating
Customized single layer glass reactor with collection or condenser into glass lid or others
Chemical Glass Reactors Including Single layer glass Reactors, Jacketed Double Wall Glass Reactors and Triple layer or Three Layer Glass Reactors . Single Layer Reactor,Glass Reactor Vessel,Single Layer Glass Reactor Price ,Single Layer Experimental Glass Vessel Kettle, Heating mantle Glass Reactors Zhongyi Kori(Zhengzhou)Equipment Co.,Ltd , https://www.korireactor.com
Single layer Glass Reactors means the Big Glass Reaction Vessel just single layer or One layer and Always with Stainless Steel Water Oil Bath or Heating mantle for heating to make sure the chemical Reaction occurs
Linear Technology Corporation introduces the LTC3260 and LTC3261, a universal high voltage charge pump. The LTC3261 is a high voltage, negative output charge pump that delivers up to 100mA of output current. The LTC3260 has the same charge pump as the LTC3261, but also includes two positive and negative LDO regulators, each providing up to 50mA of output current. The negative LDO post regulator is powered by the output of the negative output charge pump. Positive and negative LDO output voltage can be adjusted with an external resistor divider to 1.2V and -1.2V respectively. Both devices operate over a wide input voltage range of 4.5V to 32V. The LTC3260 and LTC3261's internal charge pumps operate in low quiescent current BurstMode® or low noise constant frequency mode with up to 88% efficiency. Charge pump output regulated to -0.94 • VIN when operating in breakout mode. In addition, when operating in Burst Mode, if both LDOs are active, the LTC3261 draws only 60μA quiescent current while the LTC3261 draws 100μA. Constant frequency operation provides low input and output ripple; in this mode, the charge pump generates an output equal to -VIN and operates at a fixed 500kHz frequency or with an external resistor in the frequency range of 50kHz to 500kHz. Other IC features include few external components, a ceramic capacitor that is stable, a soft-start circuit that prevents over-current during startup, and short-circuit and over-temperature protection. The LTC3260 and LTC3261 are ideal for a wide range of applications such as low noise bipolar / negative output power supplies with high voltage inputs, low noise bias voltage generators for industrial / instrumentation, portable medical equipment and automotive infotainment systems. The LTC3260 is available in a flat (0.75mm) 3mm × 4mm 14-lead DFN package and a 16-lead MSOP package with a bottom thermal pad in both packages. The LTC3261 is available in a 12-lead MSOP package and also has a bottom thermal pad. Both devices have E-Class and I-Class operating junction temperatures from -40 ° C to + 125 ° C. Low Noise High Voltage Negative Output Charge Pump LTC3260: Dual Supply Negative Charge Pump VIN Range: 4.5V to 32V Negative Output Charge Pump Generates -VIN Charge Pump Output Current up to 100mA Low Noise Negative LDO Post Regulator (ILDOˉ = 50mA Max ) Low Noise Independent Positive LDO Regulator (ILDO + = 50mA Max) 100μA Quiescent Current with Both LDO Regulators Connected and Burst-Mode Operation LDO Dropout = 300mV / 50mA 50kHz to 500kHz Programmable Oscillation Ceramic Frequency Stabilized Short-Circuit / Thermal Shutdown with Ceramic Capacitors Flat 3mmx4mm 14-Lead DFN and Thermally Enhanced 16-Lead MSOP LTC3261: Negative Output Charge Pump VIN Range: 4.5V to 32V Negative Output Charge Pump Generates -VIN Charge Pump Output Current Up to 100mA 60uA Quiescent Current Operation in Burst Mode 50kHz to 500kHz Programmable Oscillator Frequency Short-Circuit / Over-Temperature Protection Flat Thermally Enhanced 12-Lead MSOP Package